For sale: 2002 Fadal VMC-6030, MP-33 control, X-60″ Y-30″ Z-30″, 10,000 rpm, 21 atc, chip conveyor.

Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

For Sale:
1996 Mazak QT-25L, T-Plus/crt, 20″ swg, 48″ centers, 3.15″ bore, 3600 rpm, 25 hp, 16
pos trt, 10″ chk ID#: 30021

1999 Mazak QT-250HP, 640T/crt, 23.6″ swg, 20″ centers, 3.1″ bore, 4000 rpm, 20 hp, 12 pos trt, 10″ chk, Barfeed ID#: 30020

2008 Doosan-Daewoo Puma 500, Fanuc 21iTB/crt, 35″ swg, 68″ centers, 1500 rpm, 5.98″ bore, 60 hp, 12 pos trt, 34 & 24″ chks ID#: 30016

1995 Mazak SQT-10M, T-Plus/crt, 17″ swg, 12″ centers, 2″ bore, 6000 rpm, 15 hp, 12 pos trt, barfeed, PC ID#: 30022

1994 Fadal VMC-4020HT, 88HS/crt, X-40″ Y-20″ Z-20″, 10000 rpm, 21 atc, 22.5 hp, 4th-Axis rotary table ID#: 30019

2000 Bridgeport Torque Cut TC-1G, DX-32/crt, X-22″ Y-16″ Z-20″, 8000 rpm, 7.5 hp, 22 atc ID#: 30018

2006 Mazak Nexus 510C, 640/crt, X-41.3″ Y-20″ Z-20″, 12000 rpm, 20 hp, 30 atc, rotary table ID#: 30017

For sale: 2008 Doosan-Daewoo Puma 500, Fanuc 21iTB/crt, 35″ swg, 68″ centers, 1500 rpm, 5.98″ bore, 60 hp, 12 pos trt, 34 & 24″ chks..ID# 30016

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Various

1. Giuliani S.P.A – VPC Multimaster – Rotary Transfer Machine – modello PD50+FVT+VA, disegno 21.3664.600

2. Starrett CMM Machine – model HGDC 3024-18B, serial BD1569

3. Zoller Geo Tool , D-71691, serial 0093

4. Universal NDT Inc – Metal Corrosion Tester – model FPW72, serial 971195, volt 220, amp 20, phase 3, cycle 60

5. Fosdick – 4ft arm, 13’’ COL, serial 17588

6. Lathe – Lodge and Shipley – serial 46068, model 2013, swing over carriage 20-1/2, swing over cr slide 13-1/2, center distance 54, date shipped March 1965

7. Press Brake – TruFab – model P165-12, serial HSB14-101, capacity 165 ton – 12 ft

Dust Collectors

1. Arrestall – Self Contained Dust Arrester – Ass’y – 68-1071331-2, Size 2400, serial # AV780727

2. Torit Dust Collector – DownFlo – Model DF 2DF4, Serial IG424336-001

3. Torit Dust Collector -

Boilers

1. (2) Cleaver Brooks Boiler – 400 HP, model CB-400-400, serial L-68517, max pressure 150 PSI, Date 10/18/79

2. Cleaver Brooks Boiler – 400 HP, model CB-600-400, serial L-62062, 150 PSI, Date 5/21/76

3. Cleaver Brooks Boiler – 600 HP, model CB600-600, serial 1-56879, 150 PSI, Date 12/3/73

Press

1. Niagara Mechanical Power Press – E-110, 480 Volt

2. V&O Air Clutch Press – 60 Ton, speed rec. 60-100, serial # 60ST-129, capacity tons – 60, stroke inches 4, max slide adj. 3 ½

3. V&O Air Clutch Press – 25 Ton, speed rec. 100-400, serial # 25ST-586, stroke inches 1 ½, max slide 2 ½

4. V&O Air Clutch Press – 25 Ton, speed rec. 120, serial # 25ST-546, stroke inches 3 ½, max slide adj 2 ½

5. V&O Air Clutch Press – 25 Ton, speed rec. 100-300, serial # 25ST-163

Crest and Branson - washers

1. Crest Ultrasonics - Ultrasonic Cleaner - CTS - 500, model OC4-1218-HE, serial 1296-T-1300, 480 volts, 310 amps, 3 phase, 50/60 hz.

2. Crest Ultrasonics – (Just for Parts) – model OC4-1218-HE, serial 1296-T-1299, 480 volts, 31 Amps, 3 Phase, 50/60 Hz.

3. Branson Washer

· Branson Still – Model BRS 160-S, Serial 8-1553-98, 230 volts, 60 Freq., 3 phase, Buc # 339302

· Branson Degreaser – Model BSD 2024-W-S, Serial 8-1552-98, Freq 40 KHZ, 230 volts, 60 Freq, 3 phase, 12 amp, Buc # 339302

· Branson Chiller Unit 1 – Model BC 500, Serial 8-1556-98, 460 volts, 60 Freq, 3 phase, 22 amps, Buc # 339302

· Branson Chiller Unit 2 – Model BC 500, Serial 8-1557-98, 460 volts, 60 Freq, 3 phase, 22 amp, Buc # 339302

· Branson Master Controller – Model TDR-50, EDP 100-825-763, S/N TCC98081065C

Ovens and Furnaces

1. Grieve Oven – Model AB-500, Serial 350029, Job # 018321, Heat Input 12 W, Max temp 350 F, 460 volts, 18 amp, 3 phase, 60 hz

2. BTU Systems – Conveyor Oven – serial # ASPA-1, model # TCA64-6-54E48, volt 230, amp 50, phase 3, kva 35, hz 50/60, max temp 1000oc

3. Oven – Trent – kw 32, volts 240, cycles 60, phase 3, model # 867-470 max temp 850 Deg. F

4. VFS – Vacuum Furnace Systems- Oven – model # TA36, serial # 2284, max operating temp 1500 Deg. F, 85 kva, 240 volts, 3 phase, 60 hz

5. BTU Systems – Oven – serial # ASPA-2, model # TCA254-10-360E18, volt 480, amp412, phase 3, kva 359, hz 50/60, max temp 900 Deg. C

6. BTU Systems – Oven – serial # ASPA-3, model # TCA144-9-162E144, volt 480, amp 150, phase 3, kva 119, hz 50/60, max temp 1150 Deg C

7. CI Hayes Inc. – Oven – Type VCQ, serial # 15119, volts 240, kw 60, max operating temp 2400 Deg. F

8. (6 tanks total) Trent Furnace Tanks – Steel – 18 kw, 115 volts, 60 cycles, 2000 Deg. F

Grinders

1. Brown & Sharpe – No 13 Universal and Tool Grinding Machine, Model No. 62011-A NC, 3 Phase Alternating Current Motor, Type PN, FR C65, HP 1/6, Cycle 60/50, RPM 1140/950

2. Thompson

3. Brown & Sharpe – 618 Micromaster Surface Grinding Machine, Serial # 523-6181-5228, 460 volts, 3 phase, 60 cycle

4. Brown & Sharpe – Serial # 6431

5. Thompson Grinder – 230 Volts, 3 Phase, 60 HZ, 17 Total Amperes

6. Blohm Grinder – Simplex 7, Machine No. 11039

7. DoAll Grinder – Machine Model G-612 M, Serial # 452-86210, 230 volt, 3 phase, 60 hertz

8. Hispano Suiza Grinder, 3N TYP DKYOV5, NO 804989, 440 volts, 60 HZ

9. Mikron A 60/0 Tool Grinder, 220 volt, 60 hz

10. Cincinnati Grinder – AC Power volts 220, 3 phase, 60 cycle, 110 AC control volts, serial # 6D1P5C-53

11. Brown & Sharpe 510 Surface Grinder – serial # 523-510-376

Chillers

1. Application Engineering AEC – Pinnacle Series – Chiller

a. Carrier Air Conditioning Unit – model 38AKS012—601, serial #3397G00071, 460 volts, 3 phase, 60 hz, RLA 19.9, LRA 99

b. Carrier Split System – model 38AKS016—610, serial #4797F09916, 460 volts, 3 phase, 60 hz, RLA 29.3, LRA 120

c. (2) Application Engineering AEC Units

1. Carrier Air Conditioning Co. Chiller – Model 19DG6967CO, Serial 733720420, Refridg. # R-11, 32544 19DG39

2. Carrier Air Conditioning Co. Chiller – Model 19DG6967C0, Serial 733720421

Refridg. # R-11, 32546 19DG39

Diesel Pump

1. Allis Chalmers Centrifugal Fire Pump – Diesel Pump – size 6×5, type KSI7, serial 891-94261-01-01, PSI 100

Optical

1. Ex-cell-o – Optical Comparator – Contour Projector – model 30-826, serial 8260326, 115 volt, max amp 20, max watt 2400

2. Amray Scanning Electron Microscope – serial 16164016, model 1610, volts 117, hertz 60, amps 20, phase 1

3. Research II Metallograph – Xenon 450 – Bausch and Lomb – cat # 42-44-17, serial # 1014 KE, 120 volts, 22 amps, max lamp 450 watts

4. Leitz Perflektometer Komparator 200 – 593925

5. Polaroid MP-3A Land Camera – serial P412548, 120 volts, 60 cycle, 600 watt max, max lamp size 150 watts

Rotary Transfer Machines

1. Jamieson – model 2601, serial 15 SR

2. Jamieson – model 2501, serial 15 SR

3. Hahn & Kolb – Variomatic – Type Variomatic T3, Masch-Nr. 113-041

4. Hahn & Kolb – GmbH 7250 Loonborg – 2.1152, 40.112/2781, 113.119.000.8

5. Jamieson – No info available

6. Jamieson – No info available

Band Saw

1. Band Saw – Marvel – series 81, model 81/m3m, serial L-1008

2. Band Saw - DoAll – model 26-2, serial 54-54179, 220 volt, phase 3, cycle 60, band length 177, file length 171, motor variable D-6456, variable transmission D35-2306, air pump 35-7714

Milling Machine

1. Bridgeport Milling Machine – series 1, 2 HP, serial 189942

2. Bridgeport Milling Machine – series 1, 2 HP, serial 194793

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: 2002 Fadal VMC-6030, MP-33 control, X-60″ Y-30″ Z-30″, 10,000 rpm, 21 atc, chip conveyor.

Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

Wanted:
Haas EC-500 or Kitamura HX-400if or Kitamura HX-500if or Makino a51 or Makino a61

Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

For Sale: 2006 DMG Deckel-Maho DMU-125P 5-axis VMC, 35″ x 50″ tbl, X-49.2″ Y-39.37″ Z-39.37″, 15,000 rpm, 40 ATC, 37.5 hp, Very Nice under 4000 hours…ID#: 30010

Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

Wanted:
Daewoo Puma 2000Y or 2000SY, 2004 or newer
Daewoo Lynx 220A, 220LC or 220LM, 2004 or newer

Wanted:
Mori-Seiki ZL-45MC
Mazak H500/50 6-Pallet
Mazak H-400N 6-pallet 4-axis

Jon Lester - UTI Machinery (877) 597-8300 sales@utimachinery.com

CIncinnat Hypro, 108″ Table, 118″ Swing , 2 Ram heads, 71″ U/R
King, 84″ Table, 94″ Swing, 2 Ram heads, 60″ U/R
Broadbent,111″ Table, 118″ Swing, 97″ U/R, 2 Rams
Niles, 140″ Table, 150″ Swing, 90″ U/R, 2 Rams, Var Spd Drive
Cincinatti , 144″ Table, 150″ Chuck, 68″ U/R, 2 Rams, Var Spd Drive
Betts 108″ Table, 112″ swing, 59″ U/R. 1 Ram Head
Niles 120″ Table, 146″ Swing, 96″ u/R, 2 Ram Heads
Allis Chalmers 200 / 400″ Swing, 200″ Chuck, 160″ U/R/, 2 Ram heads
Cincinnati 120″ Table,146″ Swing, 65″ U/R, Var Spd Drive, 2 Ram heads
KING 96″ Table, 102″ Swing, 78″ U/R/, Ram / Turret / Side head
Bullard 74″ Table, 82′ Swing, 60″ U/R/, side / Ram / Turret, Fair Condition
King 72″ Chuck, 82″ Swing / 2 Ram Heads, 56″ U/R.
Kolomna, CNC, Delta Dynapath Autocon, 2 Ram Heads, 1 Controlled by CNC Control, 157″ Table, 162″ Swing, 78″ U/R

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

1998 Mazak FH-480, M-Plus/crt, (2) 15.74″ Sq. Plts, 22″ x 22″ x22″ Trvls, 12,000 RPM, 30 ATC, 30 HP, ID#:16450

2000 Mazak FH-4800, Fusion 640/CRT, (2) 15 3/4″ Plts, X-22.05″,Y-24.02″, Z-22.02″, 40 ATC,12,000 RPM, ID#:17268

1999 Mazak FH-6800, Fusion 640/CRT, (2) 24.8″ Plts, Full 4-Axis, X-41.3″,Y-31.5″,Z-34.7″, 7000 RPM, 50HP, 40 ATC, ID#:17352

1990 Mazak H-800, M32/crt, (2) 31.5″ pllts, X-49.21″ Y-39.37″ Z-33.46″, 4500 rpm, 35 hp, 80 atc, Probe ready, Coolant thru, ID#:17432

1988 Mazak H-630, M32/crt, (2) 24.8″ pllts, X-39.4″ Y-31.5″ Z-29.5″, 6000 rpm, 30 hp, 80 atc, Coolant thru, ID#:30003

1988 Mazak H500/50, M32/crt, (2) 19.7″ pllts, X-27.9″ Y-25.6″ Z-25.6″, 5000 rpm, CAT50 Taper, 20 hp, 40 atc, Coolant thru ID#: 30004

1993 Mazak H400N, M32/crt, (2) 15.7″ pllts, X-22″ Y-22″ Z-22″, 10,000 rpm, 15 hp, 90 atc, Coolant thru ID#: 30005

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

2004 Okuma MA-500HB, OSP-E100M/crt, (2) 19.7″ pllts, X-27.5 Y-35.4″ Z-30.7″, 6000 rpm, 40 hp, 60 atc lots of options, ID#:3000

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

2005 Haas SL-40LB, Haas/crt, 40″ swg, 89″ centers, 7.08″ bore, 1400 rpm, 55 hp, 10 pos trt, Long Bed & Big Bore Options, ID#:17456

2007 Haas SL-40T, Haas CNC/crt, 40″ swg, 25″ swg/cross slide, 44″ centers, 40 hp, 2400 rpm, 10 pos trt, 18″ chk, ID#:17378

2007 Haas TL-4, Haas/crt, 35″ swg, 91″ centers, 10.81″ bore, 500 rpm, 55 hp, (2) 25″ 3-jaw chks, (1) 32″ 4-jaw chk, chip conv. ID#: 17457

2007 Haas VF-3BYT (5-Axis), X-40″ Y-26″ Z-25″, 7500 rpm, 20 hp, 24 + 1 side mount atc, optional 5-Axis Trunion table, ID#:17379

1995 Fadal VMC-6030, Fadal 88/crt, X-60″ Y-30″ Z-30″, 10,000 rpm, 22.5 hp, 30 atc, ID#:17437

Contact: Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: Used Kiwa KH-45G Horizontal Hi-speed Machining center, Fanuc 31i/crt, (2) 19.7″ pllts, X-25.2″ Y-24″ Z-26.8″, 15,000 rpm, 220 atc, full 4th, thru tool coolant, loaded w/options & extras. ID#: 17460

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: Used Haas TL-4 CNC Lathes w/Big 10.81″ Spindle Bore, 35″ swing, 91″ centers, 55 hp, 500 rpm…ID#: 17457

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: Used Mazak H630, M32/crt, (2) 24.8″ pllts, Full 4-Axis, X-39.4″ Y-31.5″ Z-29.5″, 6000 rpm, 30 hp, 80 atc…ID#: 17436

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: Used Mazak Slant-Turn 40, Fanuc 6TB/CRT, 21 1/4″ Swg, 13 3/4″ SOCS, 40″ Ctrs, CC, 15″ Ck, 2200 RPM, 15 Tools, 4.1 Bore, X-19 1/2″, Z-41 1/4″, 40 HP…ID#: 17444

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: Used Haas SL-40LB, SL-40 LB, long bed, big bore, 40″ swg, 89″ centers, 7.08″ bore, 1400 rpm, 55 hp, 10 pos trt ID# 17456

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: LATHES, CNC 1997 Mazak M5N/2000 MILLING 1993 Cincinnati Falcon 300T-1800 MACHINING CENTERS, HORIZONTAL 1999 Mazak FH-6800 1989 Mazak H-630 1990 Mazak H-800 1995 Fadal VMC-6030 2001 Haas VF-5 1986 Matsuura MC-510V 1998 Okuma Cadet V4020 MACHINING CENTERS, VERTICAL1999 OKK MCV-1060

Wanted: Mazak SQT-15M CNC Lathe

wanted: Haas VF-8/40 or VF-9/40 or equiv #40 taper vertical machining center.

For sale:

CNC LATHES 2-AXIS
1997 Mazak M5N/2000, T-Plus/crt, 24″ swg, 80″ centers, 6.5″ bore, 1000 rpm, 30 hp, 8
+ 6 pos trt. 20″ Air chuck, ID#:17428
LATHES, CNC, W/MILLING
1993 Cincinnati Falcon 300T-1800, 850sx/crt, 25.6″ swg, 68″ centers, 3.7″ bore, 3000
rpm, 40 hp, 12 pos trt, live tooling, 12″ chk, Steady, ID#:17393
MACHINING CENTERS, HORIZONTAL, CNC
1999 Mazak FH-6800, Mazatrol Fusion 640/CRT, (2) 24.8″ Plts, Full 4-Axis, X-41.3″,Y-
31.5″,Z-34.7″, 7000 RPM, 50HP, 40 ATC, #50, CC,, ID#:17352
1989 Mazak H-630, M32/crt, (2) 24.8″ pllts, X-39.4″ Y-31.5″ Z-29.5″, 6000 rpm, 30 hp,
80 atc, ID#: 17436
1990 Mazak H-800, M32/crt, (2) 31.5″ pllts, X-49.21″ Y-39.37″ Z-33.46″, 4500 rpm, 35
hp, 80 atc, Probe ready, Coolant thru, ID#:17432
MACHINING CENTERS, VERTICAL, CNC
1995 Fadal VMC-6030, Fadal 88/crt, X-60″ Y-30″ Z-30″, 10,000 rpm, 22.5 hp, 30 atc,
ID#:17437
2001 Haas VF-5, Haas cnc/crt, X50″ Y-26″ Z-25″, 10,000 rpm, 20 hp, 24 atc,
ID#:17425
1986 Matsuura MC-510V, Yasnac MX3/crt, X-20″ Y-14″ Z-18.1″, 6000 rpm, 7 hp, 20
atc, ID#:17438
1998 Okuma Cadet V4020, OSP-700m/crt, X-40″ Y-20″ Z-20″, 8000 rpm, 15 hp, 20 atc,
4th-axis interface, ID#:17420
MACHINING CENTERS, VERTICAL, CNC W/PALLETS
1999 OKK MCV-1060, Mits 635/crt, 41″ x 98″ tbl, X-84″ Y-41″ Z-31.5″, 6000 rpm, 35
hp, 40 atc, Shuttle pallets, ID#:17435

For Sale: 2001 Haas VF-5, Haas cnc/crt, X50″ Y-26″ Z-25″, 10,000 rpm, 20 hp, 24 atc ID#:17425

Contact Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

Wanted: Studer S151 or S-151 CNC Grinder

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: 1996 Mazak QT-20 Used CNC Lathe, T-Plus/crt, 17.3″ swg, 20″ centers, 2.44″ bore, 5000 rpm, 20 hp, 8 pos trt, 8″ chk, Chip Conveyor, ID#: 17382

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: 1993 Cincinnati Falcon 300MT-1800 Used CNC Lathe, 25.6″ swg, 68″ centers, 3000 rpm, 3.7″ spindle bore, 40 hp, 12 pos trt, live tooling, chip conveyor….ID#: 17393

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Used Mitsui-Seiki HS-6A or HS6A CNC Horizontal Machining Center, HMC, Fanuc 30iM/crt, 39.3″ sq. tbl, X-78.7″ Y-59″ Z-39.4″, Full 4th-axis, 12,000 rpm, 30 hp, 60 atc, Coolant Thru spdl…ID#: 17386

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Used Toshiba BP-110.P20 CNC Horizontal mill HBM, Tosnuc 888/crt, 4.3″ spdl, 55″ x 80″ tbl, X-100″ Y-65″, 3000 rpm, 30 hp, 38 atc….ID# 17385

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: 2001 Fadal VMC-3016L, VMC3016L, Fadal CNC/crt, X-30″ Y-16″ Z-28″, 7500 rpm, 21 atc, Rigid tapping..ID#: 17376

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Used Butler Elgamill HE 28363 Horizontal Machining Center, Heidenhain 355/crt, X-244″ Y-65″ Z-38″, 2000 rpm, 40 atc, 30 hp, Swiveling Indexing head…ID#: 17381

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Used Haas SL-40T, SL40, CNC Lathe, Haas CNC/crt, 40″ swg, 25″ swg/cross slide, 44″ centers, 40 hp, 2400 rpm, 10 pos trt, 18″ chk..ID#: 17378

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Used Haas VF-3BYT, VF3, VF-3YT, VF3yt, 5-Axis Vertical Machining Center, Haas CNC/crt, X-40″ Y-26″ Z-25″, 7500 rpm, 20 hp, 24 + 1 side mount atc, optional 5-Axis Trunion table..ID#:17379

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale: Haas VF-6/50TR 5-Axis Trunnion Table, Haas CNC/crt, X-64″ Y-32″ Z-30″, Built-in Trunion tilting/rotary table, 7500 rpm, 30 atc, loaded w/options….ID#: 17380

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for Sale: 2003 Fadal VMC-4020A, VMC4020, Fadal CNC/crt, X-40″ Y-20″ Z-28″, 7500 rpm, 22.5 hp, 21 atc, Full 4th-axis, tailstock, chip conveyor

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Used Mazak QT-10 atc

Wanted: Used Daewoo or Doosan Puma 700M CNC Lathe

for sale: 1999 Flow A-Series, Used water jet cutting machine, 8′ x 12′ cutting area, completely refurbished. Dual Cutting heads, dual 50 hp intensifier pumps, new computer & Flow software.

Contact Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

for sale: Used Devlieg 54K120 or 54K-120 5″ spindle dia, X-120″ Y-48″, 50″ x 120″ tbl, 1000 rpm ID#17364

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For Sale: Used Mazak H-630 or H630 horizontal machining center, M32 control

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For Sale: Used Mazak H-800 or H800, M32 control

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For sale: Used Giddings & Lewis or G&L CNC VTL, G&L 800 CNC Control, 43″ swg, 36″ under rail, 5 position turret.

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

Wanted: Used Kellenberger URS-125/430 CNC Grinder

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For Sale: Used Okuma MC-60VAE or MC60VAE, 1999, OSP CNC/crt, X-59.06″ Y-24.8″ Z-24.8″, 5000 rpm, #50 Taper, Renishaw Probe, IMAP, Low hours

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For Sale: Used Haas VF-E VMC, Haas CNC/crt, X-20″ Y-16″ Z-20″, 15 hp, 20 atc, 7500 rpm, ID#: 17359

Contact Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

For sale: Mazak QT-20 or Quick-Turn 20, T-Plus control, automatic parts catcher, 17.3″ swg, 20″ centers, 2.4″ bore, 5000 rpm, 12 pos trt ID#: 17360

Contact Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

For Sale: Used Mazak FH-6800, 1999, Mazatrol Fusion 640/CRT, (2) 24.8″ Plts, 1 Deg, X-41.3″,Y-31.5″,Z-34.7″, 6000 RPM, 50HP, 40 ATC, #50, CC, Used Mazak Mill, ID#: 17352

For Sale: Youji YV-600A or YV600A Used CNC Vertical Turret Lathe, 2000, 24″ 3-Jaw Hydraulic Chuck, 6 position turret, 1500 rpm, 30 hp, Fanuc CNC Control

For sale: Used Mazak STX-48 STX48 Laser, 4′ x8′ capacity, 1500 watt w/42000 hours

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

Wanted: Zeiss CMM Contura G2 RDS, 2006 or newer. COORDINATE MEASURING MACHINE

For sale: Okuma LU-45, LU45 M-2SC-2000, CNC lathe with live tooling, milling. Okuma Impact LU-45M 2sc 2000, 1999 Used Okuma Lathe

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com