For sale: 2006 Haas SL-30T, 30″ swing, 34″ centers, 10″ chk, 12 pos trt, 3.5″ spindle bore, 30 hp, High-Torque 2-Speed gearbox, Programmable Tailstock, chip conveyor, Tool Presetter, Visual Quick Code Programming, 3.5″ Floppy Disk drive

Contact: Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

For Sale: 2007 Haas SL-30T Big Bore, Live Tooling, Haas CNC/crt, 30″ swg, 39″ centers, 4.62″ spdl bore, 2400 rpm, 15″ chk, 12 pos trt, Live tooling, 4.62″ Big Bore Spindle Option, 40hp 2-speed gearbox, 15″ chuck, Tailstock, ID#:…30030

Contact: Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

CNC Lathe
52″ Swing over bed
Center distance as much as possible

CNC Lathe
28″ Swing over bed
157″ Center distance

CNC Horizontal boring mill
118″x86″x60″ travel
at least 2k rpm

another boring mill like above with a rotary table, full 4th

(2) Heavy duty conventional lathes 40″ swing over bed 157″ center distance

Would Like 2000 or newer machines.

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For Sale:
1996 Mazak QT-25L, T-Plus/crt, 20″ swg, 48″ centers, 3.15″ bore, 3600 rpm, 25 hp, 16
pos trt, 10″ chk ID#: 30021

1999 Mazak QT-250HP, 640T/crt, 23.6″ swg, 20″ centers, 3.1″ bore, 4000 rpm, 20 hp, 12 pos trt, 10″ chk, Barfeed ID#: 30020

2008 Doosan-Daewoo Puma 500, Fanuc 21iTB/crt, 35″ swg, 68″ centers, 1500 rpm, 5.98″ bore, 60 hp, 12 pos trt, 34 & 24″ chks ID#: 30016

1995 Mazak SQT-10M, T-Plus/crt, 17″ swg, 12″ centers, 2″ bore, 6000 rpm, 15 hp, 12 pos trt, barfeed, PC ID#: 30022

1994 Fadal VMC-4020HT, 88HS/crt, X-40″ Y-20″ Z-20″, 10000 rpm, 21 atc, 22.5 hp, 4th-Axis rotary table ID#: 30019

2000 Bridgeport Torque Cut TC-1G, DX-32/crt, X-22″ Y-16″ Z-20″, 8000 rpm, 7.5 hp, 22 atc ID#: 30018

2006 Mazak Nexus 510C, 640/crt, X-41.3″ Y-20″ Z-20″, 12000 rpm, 20 hp, 30 atc, rotary table ID#: 30017

For sale: 2008 Doosan-Daewoo Puma 500, Fanuc 21iTB/crt, 35″ swg, 68″ centers, 1500 rpm, 5.98″ bore, 60 hp, 12 pos trt, 34 & 24″ chks..ID# 30016

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted:
Daewoo Puma 2000Y or 2000SY, 2004 or newer
Daewoo Lynx 220A, 220LC or 220LM, 2004 or newer

Wanted:
Mori-Seiki ZL-45MC
Mazak H500/50 6-Pallet
Mazak H-400N 6-pallet 4-axis

Jon Lester - UTI Machinery (877) 597-8300 sales@utimachinery.com

for sale: Used Mazak Slant-Turn 40, Fanuc 6TB/CRT, 21 1/4″ Swg, 13 3/4″ SOCS, 40″ Ctrs, CC, 15″ Ck, 2200 RPM, 15 Tools, 4.1 Bore, X-19 1/2″, Z-41 1/4″, 40 HP…ID#: 17444

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: Used Haas SL-40LB, SL-40 LB, long bed, big bore, 40″ swg, 89″ centers, 7.08″ bore, 1400 rpm, 55 hp, 10 pos trt ID# 17456

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Mazak SQT-15M CNC Lathe

For sale:

CNC LATHES 2-AXIS
1997 Mazak M5N/2000, T-Plus/crt, 24″ swg, 80″ centers, 6.5″ bore, 1000 rpm, 30 hp, 8
+ 6 pos trt. 20″ Air chuck, ID#:17428
LATHES, CNC, W/MILLING
1993 Cincinnati Falcon 300T-1800, 850sx/crt, 25.6″ swg, 68″ centers, 3.7″ bore, 3000
rpm, 40 hp, 12 pos trt, live tooling, 12″ chk, Steady, ID#:17393
MACHINING CENTERS, HORIZONTAL, CNC
1999 Mazak FH-6800, Mazatrol Fusion 640/CRT, (2) 24.8″ Plts, Full 4-Axis, X-41.3″,Y-
31.5″,Z-34.7″, 7000 RPM, 50HP, 40 ATC, #50, CC,, ID#:17352
1989 Mazak H-630, M32/crt, (2) 24.8″ pllts, X-39.4″ Y-31.5″ Z-29.5″, 6000 rpm, 30 hp,
80 atc, ID#: 17436
1990 Mazak H-800, M32/crt, (2) 31.5″ pllts, X-49.21″ Y-39.37″ Z-33.46″, 4500 rpm, 35
hp, 80 atc, Probe ready, Coolant thru, ID#:17432
MACHINING CENTERS, VERTICAL, CNC
2001 Haas VF-5, Haas cnc/crt, X50″ Y-26″ Z-25″, 10,000 rpm, 20 hp, 24 atc,
ID#:17425
1986 Matsuura MC-510V, Yasnac MX3/crt, X-20″ Y-14″ Z-18.1″, 6000 rpm, 7 hp, 20
atc, ID#:17438
1998 Okuma Cadet V4020, OSP-700m/crt, X-40″ Y-20″ Z-20″, 8000 rpm, 15 hp, 20 atc,
4th-axis interface, ID#:17420
MACHINING CENTERS, VERTICAL, CNC W/PALLETS
1999 OKK MCV-1060, Mits 635/crt, 41″ x 98″ tbl, X-84″ Y-41″ Z-31.5″, 6000 rpm, 35
hp, 40 atc, Shuttle pallets, ID#:17435

For Sale: Used Haas SL-40T, SL40, CNC Lathe, Haas CNC/crt, 40″ swg, 25″ swg/cross slide, 44″ centers, 40 hp, 2400 rpm, 10 pos trt, 18″ chk..ID#: 17378

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Used Daewoo or Doosan Puma 700M CNC Lathe

Wanted: Used CNC Lathe, 3″ bar capacity, mid 1990’s or newer. No Mazak

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Used Mazak Nexus 200 or Nexus 250 CNC Lathe

wanted: Used CNC Lathes, 16″ cutting diameter, 50-60″ center distance, fanuc control

Wanted: Used Hitachi-Seiki CNC lathes model Hicell 23.

Wanted: Used CNC Lathes, 40″ swing, 60″ centers, 1998 or newer.

Wanted: Large Used CNC Lathes, 60″ swing over Cross Slide, 24′ (288″) between centers, 70,000 lbs load capacity.

Contact Jon Lester - (877) 597-8300 or Sales@utimachinery.com

Wanted: Used CNC Lathes w/9″ bore or larger and minimum of 60″ centers, would like 80″ centers & 10″ bore on a Used CNC Lathe. Mazak Powermaster Universal, Mori-Seiki LL-7

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or email: sales@utimachinery.com

Wanted: Used Mori-Seiki Lathes LL-7B, Fanuc 6T or newer control, Mori-Seiki LL-7B or LL7B.

Contact: Jon Lester (877) 597-8300 or email: sales@utimachinery.com

Wanted: Used Mazak QT-300 or Mazak QT300,

for sale: 1998 Mazak SQT-18M, Mazak Super Quick Turn 18M CNC Lathe with live tooling, tailstock, 10″ chuck, Mazatrol T-Plus Control.

For sale: Used CNC Lathes, Engine lathes, vetical mills, grinders, hones etc. List below. Located on West Coast of U.S.

1)HAAS HL-4 Turning Center. 30HP with 10″ chuck. Programable tail stock. Cutting capacity 14.5×34. Purchased new in 1997

2) HAAS HL-1 Turning Center. 20HP with 8″ chuck, cutting capacity 10″x20″. Purchased new in 1996

3)Acra Mill 3HP with digital readout, power feed on X axis 10×42 table. Purchased new in 1996

4)Acra Mill 5HP with digital readout, power feed on X axis 10×54 table. Purchased new in 1996

5)Victor 13″ Lathe with tail stock 6″ chuck, tool post Etc.. 7.5HP 40″Travel. Purchased new in 1996

6)Hitachi Vertical power mill. 10HP. 50 Taper spindle nose, power feed on X,Y,&Z. 10 5/8 X 54Table. Purchased used in 2001

7)Brown & Sharpe tool cutter grinder with lots of tooling. Purchased used in 2001

8)Sunnen MBC 1805D automatic honing machine. .060-6.50DIA range. Lots of Arbors and stones. Like new less than 40hours on this machine. Purchased new in 2002

9)Jones & Lampson comparitor floor model with 14″ screen, digital position readout. Purchased used in 2002

10)Scherr Tumico comparitor with 10″ screen, floor model. Purchased used in 1996

11)Potter Coordinent measuring machine with wizard 100 Digital readout. 26×34 table, with lots of probes.

12)Mojave Granit surface plate. 6″Thick X36X72, with heavy duty steel stand.

13)Mitutoyo surface finish tester. .401 with probe and master setter. Purchased new in 1996

Click her to visit our list of Used CNC Lathes with live tooling, Turning centers with live tooling.

Click here to view a partial list of the Used CNC Lathes or Turning Centers we have available for sale.

We have used Lathes for sale. used cnc lathes for sale.

for sale: 2001 Doosan T210, t-210, Twin spindle vertical lathes, Fanuc 18T cnc control8.27″ machining diameter, A2-6 spindle nose, 4000 rpm, 15 hp, (2) 8.5″ Chucks. Used lathes, used cnc vertical lathes, Used twin spindles turning centers, cnc lathes needs.

for sale: 2001 Hitachi-Seiki CS25 CS-25 Vertical turning centers vertical lathes, Seicos 21L cnc control, 15.7″ swing, 10″ chuck, A2-8 spindle nose, 4000 rpm, 25 hp, Pick and place system, chip conveyor, used lathes, used vertical lathes used cnc vetical lathes, boring mills HBM VBM VTL needs.

For sale (1) Used CNC Lathes 2001 Okuma LH35N Okuma LH-35N 3000, OSP-U100L control, 24″ swg, 118″ centers, Nice used lathes

1998 Mazak SQT-18M, Mazak SQT18M, Mazak Super Quick Turn 18M, Mazatrol T-Plus CNC Control, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, Swing-20.91″, X-7.09″, Y-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16492

Okuma & Howa ACT 2SPV3, vertical turning lathes, Fanuc OTT/Crt, Twin Spindles, (2) 10″ Chucks, (2) 12 Station Turret, (2) Rear Discharge C.C., (2) 30-HP Spindle Motor, Distance Between Center 23.62″, Max. Cutting Dia. 13.78″, ID# 16506

BORING MILLS, VERTICAL & VTL, CNC MULTI-SPINDLE
16506 1992/2007 Okuma & Howa ACT-2SP-V3 Fanuc 0TT/crt, Fanuc OTT/Crt, Twin Spindle, (2) 10″ Chucks, (2) 12 Station Turret, (2) Rear
Discharge C.C., (2) 30-HP Spindle Motor, Distance Between Center 23.62″, Max. Cutting Dia. 13.78″, ID# 16506
BORING MILLS, VERTICAL & VTL, CNC & NC
16510 2001 Hitachi-Seiki CS25 Seicos 21L CNC/crt, Seicos 21L/CRT, ,X-15.5″, Z-14.6″, Max Swing-15.7″, Table Dia- 10″, Max. Swing -15.7″,
Spindle Nose- A2-8, 4000 RPM, 25HP, Pick/Place Spindle System, C.C., RS-232, ID# 16510
LATHES, CNC, 2-AXIS, CHUCKER
16491 1998 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, CC, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length, 5000
RPM, 2.44 Hole, 8 Tools, Tool-Eye, ID# 16491
16462 1998/2007 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length,
5000 RPM, 2.44 Hole, 8 Tools
11078 1989 Jones & Lamson 615 Shaft Delta Dynapath 10/CRT, Delta 10/crt, 25″ swg, 15.5″ swg over cross slide, 6.75″ hole, 1200 rpm, 40
hp, 8 pos trt
LATHES, CNC, HORIZ. TWIN SPINDLES
16509 2001/2007 Doosan T-210 Twin Spindle Fanuc 18T/crt, Fanuc 18T/CRT, Twin Spindles, Max Machining Diameter 8.27″, Max. Machining length 7.88″, Spindle Nose A2-6, MT #7, 4000 RPM, 15 HP, (2) 8.5″ 3-Jaw Hyd. Chuck, C.C., RS-232, ID# 16509
LATHES, CNC, 2-AXIS, UNIVERSAL
16623 1997 Daewoo PUMA 10HC Mitsubishi 520L/crt, Mitsubishi 520L/crt, Swing-19.7″, Max Mach Diameter-14.6″, 3500 RPM, 30 HP, A2-8, 10″
3-Jaw Chuck, #4MT, X-8.3″, Z-21.7″, 10 tools, 3.4″ bore,ID# 16623
16414 1998/2007 Hyundai HIT-18S Siemens 840C/14″ Color crt, Hitrol-EZ/14″ Color Control,X-7.09″, Y - 20.08″, Max Swing - 17.32″, Max
Cutting - 10.00″ x 19.69″, Max Speed - 3600 RPM, Motor - 15HP, Spindle Bore - 3.15″, Tailstock.
16367 1998 Hardinge Cobra 65 Fanuc 21T/crt, Fanuc 21T/Crt, 26″ Swg, 31″ Ctrs, 29.5 HP, 12 Tools, 4500 RPM, 10″ 3-J Ck, A2-8, 2 1/2″ Bar
16241 1984 Hitachi-Seiki Hitech-Turn 20 Fanuc 3T/CRT, Fanuc 3T/crt, 17.7″ swg, 12″ centers, 8″ chk, 1.75″ bar cap, 3600 rpm, 12 pos trt
16181 1988 Femco WNCL-20/60 Fanuc 10T/CRT, Fanuc 10T/CRT, 21.3″ Swg, 10.2″ Max. Mch. Dia, 28.5″ Ctr, 2500 RPM, 30 HP, 12 Tools,
2.4″ Bore, 10″ Ck, CC, X-6″, Z-25″
LATHES, CNC, 2-AXIS UNIVERSAL W/MILLING
16492 1998 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, Swing-20.91″, X-7.09″,
Y-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16492
16463 1998/2007 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, C.C.,
Swing-20.91″, X-7.09″, Z-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16463
LATHES, ENGINE
16878 1984 Summit 19-4 x 80 , Swing Over Bed-20.5″, Swing Thru Gap-28″, Gap Length-15.375″, Swing Over Cross Slide-12.25″, Distance
Between Centers-80″,
15846 1984 Kingston HL-2500 Model D , 21″ Swg, 100″ Ctrs, 3 1/8″ Hole, 1500 RPM, 13 1/8″ SOCS, 10 HP, 28 1/8″ Gap, Inch/Metric, 3-J, 4-J,
Face,
MACHINING CENTERS, HORIZONTAL CNC
16489 1998 Mazak FH-480 Mazatrol M-Plus/crt, Mazatrol M-Plus/CRT, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30
ATC, 1260 IPM, 30 HP, CC, ID# 16489
16450 1998/2007 Mazak FH-480 Mazatrol M-Plus/crt, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30 ATC, 1260 IPM,
30 HP, CC
15510 1986 Kitamura H-300 Fanuc 11MF/CRT, Fanuc 11MF, 12″ (2) Plts, 360,000, 15.7″ x 16.7″ x 15.7″ Trvls, 30 ATC, 10,000 RPM, Color
Graphics, Conversational, RS-232,
MACHINING CENTERS, VERTICAL, CNC

16803 1999 Fadal 5020A Fadal 88HS/CRT, Fadal 88HS/CRT, Table-57″ x 20″, X-50″, Y-20″, Z-20″, #40 Taper, 7500 RPM, 22.5 HP, 30 ATC,
SMW-NC-BT-275 Rotary Table, ID# 16803
16768 1990 Kitamura Mycenter 2 Fanuc OMC Control, Fanuc OMC Control, Table-16.1″x 35.4″, Max Load-660 lbs, X-23″, Y-16.9″, Z-18.1″,
Spindle Taper- NST#40, 7000 RPM, 7.5 HP
MILLERS, CONTOUR
15173 2001 Fitchburg Curvature Milling Machine Model M0974 , PLC, 14″, 18 1/8″ Tbl, 5 HP, 41″ Max. Stroke, Coolant, Lube, Enerpac Hyd.
Clamp System,Mill is tooled and fixtured to do small and large P-line internal radial roots (Air Foil Blades)
MILLERS, UNIVERSAL
16358 1999 Sharp VH3 , Vertical & Horizontal Heads, 12″ x 51″ tbl, 37.3″ long tvl, 14.8″ cross tvl, 18.5″ vert tvl, power draw bar

All of our CNC Lathes, CNC Machining Centers

Used Lathes 4-Axis