For sale: 1969 Giddings & Lewis Radial Arm Drill, 6′ arm, 15″ column, box table….ID#: 30069

Jon Lester - UTI Machinery Corp Email: utimachinery@gmail.com or Phone (877) 597-8300

Mazatrol M-Plus control from FH-480

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

Mazatrol T-Plus control from Super Quick Turn 18M

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

Fanuc 0T, Fanuc 10T CNC Control Boards, Parts for sale

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For sale: Complete Fanuc 18M CNC Control removed from Daewoo DMV-400.

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: 1992 Almco, 450 GPM, 700 gal dirty tank, 151 gal clean tank, paper filtration system with drag-out conveyor system, 7-1/2 ton Koolant Koller.

Jon Lester - UTI Machinery (877) 597-8300 or sales@utimachinery.com

1997 SAMSCO MODEL 600-316, EVAPORATOR SER#00739
395,000 BTU GAS FIRED
110 VAC 1PH 15A
750 Gallon Processing Tank

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Used Trepanning lathe with capacity to handle 6″ diameter, 120″ deep.

Contact: Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

For sale: Used Agie Mondo III Ram EDM, 1996, Futura III EC-3 control, 14″ x 11.8″ x 9.8″ Travels, 45″ x 23″ x 30″ deep tank, 40 amp, ID#: 17288

For sale: Used Agie Mondo II EDM, 1996, Futura II control, 20 amp, 8″ x 6″ x 8″ travels, 24″ x 11″ x 15″ deep Tank. ID#: 17287

For sale:
NACHI AW 11 robot
ADVANTAGE water chillers

For sale: Used CNC Lathes, Engine lathes, vetical mills, grinders, hones etc. List below. Located on West Coast of U.S.

1)HAAS HL-4 Turning Center. 30HP with 10″ chuck. Programable tail stock. Cutting capacity 14.5×34. Purchased new in 1997

2) HAAS HL-1 Turning Center. 20HP with 8″ chuck, cutting capacity 10″x20″. Purchased new in 1996

3)Acra Mill 3HP with digital readout, power feed on X axis 10×42 table. Purchased new in 1996

4)Acra Mill 5HP with digital readout, power feed on X axis 10×54 table. Purchased new in 1996

5)Victor 13″ Lathe with tail stock 6″ chuck, tool post Etc.. 7.5HP 40″Travel. Purchased new in 1996

6)Hitachi Vertical power mill. 10HP. 50 Taper spindle nose, power feed on X,Y,&Z. 10 5/8 X 54Table. Purchased used in 2001

7)Brown & Sharpe tool cutter grinder with lots of tooling. Purchased used in 2001

8)Sunnen MBC 1805D automatic honing machine. .060-6.50DIA range. Lots of Arbors and stones. Like new less than 40hours on this machine. Purchased new in 2002

9)Jones & Lampson comparitor floor model with 14″ screen, digital position readout. Purchased used in 2002

10)Scherr Tumico comparitor with 10″ screen, floor model. Purchased used in 1996

11)Potter Coordinent measuring machine with wizard 100 Digital readout. 26×34 table, with lots of probes.

12)Mojave Granit surface plate. 6″Thick X36X72, with heavy duty steel stand.

13)Mitutoyo surface finish tester. .401 with probe and master setter. Purchased new in 1996

for sale: 2001 Tocco Aqua Quinch 3600, Induction Heating furnace, induction heat treating furnace. Tocco Induction II Control, 300 kilowatt Scanning Induction Heating machine, Dual part stations. ID#: 16511.

BORING MILLS, VERTICAL & VTL, CNC MULTI-SPINDLE
16506 1992/2007 Okuma & Howa ACT-2SP-V3 Fanuc 0TT/crt, Fanuc OTT/Crt, Twin Spindle, (2) 10″ Chucks, (2) 12 Station Turret, (2) Rear
Discharge C.C., (2) 30-HP Spindle Motor, Distance Between Center 23.62″, Max. Cutting Dia. 13.78″, ID# 16506
BORING MILLS, VERTICAL & VTL, CNC & NC
16510 2001 Hitachi-Seiki CS25 Seicos 21L CNC/crt, Seicos 21L/CRT, ,X-15.5″, Z-14.6″, Max Swing-15.7″, Table Dia- 10″, Max. Swing -15.7″,
Spindle Nose- A2-8, 4000 RPM, 25HP, Pick/Place Spindle System, C.C., RS-232, ID# 16510
LATHES, CNC, 2-AXIS, CHUCKER
16491 1998 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, CC, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length, 5000
RPM, 2.44 Hole, 8 Tools, Tool-Eye, ID# 16491
16462 1998/2007 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length,
5000 RPM, 2.44 Hole, 8 Tools
11078 1989 Jones & Lamson 615 Shaft Delta Dynapath 10/CRT, Delta 10/crt, 25″ swg, 15.5″ swg over cross slide, 6.75″ hole, 1200 rpm, 40
hp, 8 pos trt
LATHES, CNC, HORIZ. TWIN SPINDLES
16509 2001/2007 Doosan T-210 Twin Spindle Fanuc 18T/crt, Fanuc 18T/CRT, Twin Spindles, Max Machining Diameter 8.27″, Max. Machining length 7.88″, Spindle Nose A2-6, MT #7, 4000 RPM, 15 HP, (2) 8.5″ 3-Jaw Hyd. Chuck, C.C., RS-232, ID# 16509
LATHES, CNC, 2-AXIS, UNIVERSAL
16623 1997 Daewoo PUMA 10HC Mitsubishi 520L/crt, Mitsubishi 520L/crt, Swing-19.7″, Max Mach Diameter-14.6″, 3500 RPM, 30 HP, A2-8, 10″
3-Jaw Chuck, #4MT, X-8.3″, Z-21.7″, 10 tools, 3.4″ bore,ID# 16623
16414 1998/2007 Hyundai HIT-18S Siemens 840C/14″ Color crt, Hitrol-EZ/14″ Color Control,X-7.09″, Y - 20.08″, Max Swing - 17.32″, Max
Cutting - 10.00″ x 19.69″, Max Speed - 3600 RPM, Motor - 15HP, Spindle Bore - 3.15″, Tailstock.
16367 1998 Hardinge Cobra 65 Fanuc 21T/crt, Fanuc 21T/Crt, 26″ Swg, 31″ Ctrs, 29.5 HP, 12 Tools, 4500 RPM, 10″ 3-J Ck, A2-8, 2 1/2″ Bar
16241 1984 Hitachi-Seiki Hitech-Turn 20 Fanuc 3T/CRT, Fanuc 3T/crt, 17.7″ swg, 12″ centers, 8″ chk, 1.75″ bar cap, 3600 rpm, 12 pos trt
16181 1988 Femco WNCL-20/60 Fanuc 10T/CRT, Fanuc 10T/CRT, 21.3″ Swg, 10.2″ Max. Mch. Dia, 28.5″ Ctr, 2500 RPM, 30 HP, 12 Tools,
2.4″ Bore, 10″ Ck, CC, X-6″, Z-25″
LATHES, CNC, 2-AXIS UNIVERSAL W/MILLING
16492 1998 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, Swing-20.91″, X-7.09″,
Y-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16492
16463 1998/2007 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, C.C.,
Swing-20.91″, X-7.09″, Z-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16463
LATHES, ENGINE
16878 1984 Summit 19-4 x 80 , Swing Over Bed-20.5″, Swing Thru Gap-28″, Gap Length-15.375″, Swing Over Cross Slide-12.25″, Distance
Between Centers-80″,
15846 1984 Kingston HL-2500 Model D , 21″ Swg, 100″ Ctrs, 3 1/8″ Hole, 1500 RPM, 13 1/8″ SOCS, 10 HP, 28 1/8″ Gap, Inch/Metric, 3-J, 4-J,
Face,
MACHINING CENTERS, HORIZONTAL CNC
16489 1998 Mazak FH-480 Mazatrol M-Plus/crt, Mazatrol M-Plus/CRT, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30
ATC, 1260 IPM, 30 HP, CC, ID# 16489
16450 1998/2007 Mazak FH-480 Mazatrol M-Plus/crt, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30 ATC, 1260 IPM,
30 HP, CC
15510 1986 Kitamura H-300 Fanuc 11MF/CRT, Fanuc 11MF, 12″ (2) Plts, 360,000, 15.7″ x 16.7″ x 15.7″ Trvls, 30 ATC, 10,000 RPM, Color
Graphics, Conversational, RS-232,
MACHINING CENTERS, VERTICAL, CNC

16803 1999 Fadal 5020A Fadal 88HS/CRT, Fadal 88HS/CRT, Table-57″ x 20″, X-50″, Y-20″, Z-20″, #40 Taper, 7500 RPM, 22.5 HP, 30 ATC,
SMW-NC-BT-275 Rotary Table, ID# 16803
16768 1990 Kitamura Mycenter 2 Fanuc OMC Control, Fanuc OMC Control, Table-16.1″x 35.4″, Max Load-660 lbs, X-23″, Y-16.9″, Z-18.1″,
Spindle Taper- NST#40, 7000 RPM, 7.5 HP
MILLERS, CONTOUR
15173 2001 Fitchburg Curvature Milling Machine Model M0974 , PLC, 14″, 18 1/8″ Tbl, 5 HP, 41″ Max. Stroke, Coolant, Lube, Enerpac Hyd.
Clamp System,Mill is tooled and fixtured to do small and large P-line internal radial roots (Air Foil Blades)
MILLERS, UNIVERSAL
16358 1999 Sharp VH3 , Vertical & Horizontal Heads, 12″ x 51″ tbl, 37.3″ long tvl, 14.8″ cross tvl, 18.5″ vert tvl, power draw bar