Mazatrol M-Plus control from FH-480

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

Mazatrol T-Plus control from Super Quick Turn 18M

Jon Lester - UTI Machinery Corp (877) 597-8300 or Sales@utimachinery.com

For Sale:
1996 Mazak QT-25L, T-Plus/crt, 20″ swg, 48″ centers, 3.15″ bore, 3600 rpm, 25 hp, 16
pos trt, 10″ chk ID#: 30021

1999 Mazak QT-250HP, 640T/crt, 23.6″ swg, 20″ centers, 3.1″ bore, 4000 rpm, 20 hp, 12 pos trt, 10″ chk, Barfeed ID#: 30020

2008 Doosan-Daewoo Puma 500, Fanuc 21iTB/crt, 35″ swg, 68″ centers, 1500 rpm, 5.98″ bore, 60 hp, 12 pos trt, 34 & 24″ chks ID#: 30016

1995 Mazak SQT-10M, T-Plus/crt, 17″ swg, 12″ centers, 2″ bore, 6000 rpm, 15 hp, 12 pos trt, barfeed, PC ID#: 30022

1994 Fadal VMC-4020HT, 88HS/crt, X-40″ Y-20″ Z-20″, 10000 rpm, 21 atc, 22.5 hp, 4th-Axis rotary table ID#: 30019

2000 Bridgeport Torque Cut TC-1G, DX-32/crt, X-22″ Y-16″ Z-20″, 8000 rpm, 7.5 hp, 22 atc ID#: 30018

2006 Mazak Nexus 510C, 640/crt, X-41.3″ Y-20″ Z-20″, 12000 rpm, 20 hp, 30 atc, rotary table ID#: 30017

Wanted:
Mori-Seiki ZL-45MC
Mazak H500/50 6-Pallet
Mazak H-400N 6-pallet 4-axis

Jon Lester - UTI Machinery (877) 597-8300 sales@utimachinery.com

1998 Mazak FH-480, M-Plus/crt, (2) 15.74″ Sq. Plts, 22″ x 22″ x22″ Trvls, 12,000 RPM, 30 ATC, 30 HP, ID#:16450

2000 Mazak FH-4800, Fusion 640/CRT, (2) 15 3/4″ Plts, X-22.05″,Y-24.02″, Z-22.02″, 40 ATC,12,000 RPM, ID#:17268

1999 Mazak FH-6800, Fusion 640/CRT, (2) 24.8″ Plts, Full 4-Axis, X-41.3″,Y-31.5″,Z-34.7″, 7000 RPM, 50HP, 40 ATC, ID#:17352

1988 Mazak H500/50, M32/crt, (2) 19.7″ pllts, X-27.9″ Y-25.6″ Z-25.6″, 5000 rpm, CAT50 Taper, 20 hp, 40 atc, Coolant thru ID#: 30004

1993 Mazak H400N, M32/crt, (2) 15.7″ pllts, X-22″ Y-22″ Z-22″, 10,000 rpm, 15 hp, 90 atc, Coolant thru ID#: 30005

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

for sale: Used Mazak Slant-Turn 40, Fanuc 6TB/CRT, 21 1/4″ Swg, 13 3/4″ SOCS, 40″ Ctrs, CC, 15″ Ck, 2200 RPM, 15 Tools, 4.1 Bore, X-19 1/2″, Z-41 1/4″, 40 HP…ID#: 17444

Jon Lester - UTI Machinery Corp (877) 597-8300 or sales@utimachinery.com

Wanted: Mazak SQT-15M CNC Lathe

For sale:

CNC LATHES 2-AXIS
1997 Mazak M5N/2000, T-Plus/crt, 24″ swg, 80″ centers, 6.5″ bore, 1000 rpm, 30 hp, 8
+ 6 pos trt. 20″ Air chuck, ID#:17428
LATHES, CNC, W/MILLING
1993 Cincinnati Falcon 300T-1800, 850sx/crt, 25.6″ swg, 68″ centers, 3.7″ bore, 3000
rpm, 40 hp, 12 pos trt, live tooling, 12″ chk, Steady, ID#:17393
MACHINING CENTERS, HORIZONTAL, CNC
1999 Mazak FH-6800, Mazatrol Fusion 640/CRT, (2) 24.8″ Plts, Full 4-Axis, X-41.3″,Y-
31.5″,Z-34.7″, 7000 RPM, 50HP, 40 ATC, #50, CC,, ID#:17352
1989 Mazak H-630, M32/crt, (2) 24.8″ pllts, X-39.4″ Y-31.5″ Z-29.5″, 6000 rpm, 30 hp,
80 atc, ID#: 17436
1990 Mazak H-800, M32/crt, (2) 31.5″ pllts, X-49.21″ Y-39.37″ Z-33.46″, 4500 rpm, 35
hp, 80 atc, Probe ready, Coolant thru, ID#:17432
MACHINING CENTERS, VERTICAL, CNC
2001 Haas VF-5, Haas cnc/crt, X50″ Y-26″ Z-25″, 10,000 rpm, 20 hp, 24 atc,
ID#:17425
1986 Matsuura MC-510V, Yasnac MX3/crt, X-20″ Y-14″ Z-18.1″, 6000 rpm, 7 hp, 20
atc, ID#:17438
1998 Okuma Cadet V4020, OSP-700m/crt, X-40″ Y-20″ Z-20″, 8000 rpm, 15 hp, 20 atc,
4th-axis interface, ID#:17420
MACHINING CENTERS, VERTICAL, CNC W/PALLETS
1999 OKK MCV-1060, Mits 635/crt, 41″ x 98″ tbl, X-84″ Y-41″ Z-31.5″, 6000 rpm, 35
hp, 40 atc, Shuttle pallets, ID#:17435

Wanted: Used Mazak Nexus 200 or Nexus 250 CNC Lathe

Wanted: Used CNC Lathes w/9″ bore or larger and minimum of 60″ centers, would like 80″ centers & 10″ bore on a Used CNC Lathe. Mazak Powermaster Universal, Mori-Seiki LL-7

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or email: sales@utimachinery.com

We are looking for a Used Mazak 1500 watt Laser or Used Mazak 2000 watt Laser.

Wanted: Used Mazak QT-300 or Mazak QT300,

for sale: 1998 Mazak SQT-18M, Mazak Super Quick Turn 18M CNC Lathe with live tooling, tailstock, 10″ chuck, Mazatrol T-Plus Control.

BORING MILLS, VERTICAL & VTL, CNC MULTI-SPINDLE
16506 1992/2007 Okuma & Howa ACT-2SP-V3 Fanuc 0TT/crt, Fanuc OTT/Crt, Twin Spindle, (2) 10″ Chucks, (2) 12 Station Turret, (2) Rear
Discharge C.C., (2) 30-HP Spindle Motor, Distance Between Center 23.62″, Max. Cutting Dia. 13.78″, ID# 16506
BORING MILLS, VERTICAL & VTL, CNC & NC
16510 2001 Hitachi-Seiki CS25 Seicos 21L CNC/crt, Seicos 21L/CRT, ,X-15.5″, Z-14.6″, Max Swing-15.7″, Table Dia- 10″, Max. Swing -15.7″,
Spindle Nose- A2-8, 4000 RPM, 25HP, Pick/Place Spindle System, C.C., RS-232, ID# 16510
LATHES, CNC, 2-AXIS, CHUCKER
16491 1998 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, CC, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length, 5000
RPM, 2.44 Hole, 8 Tools, Tool-Eye, ID# 16491
16462 1998/2007 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length,
5000 RPM, 2.44 Hole, 8 Tools
11078 1989 Jones & Lamson 615 Shaft Delta Dynapath 10/CRT, Delta 10/crt, 25″ swg, 15.5″ swg over cross slide, 6.75″ hole, 1200 rpm, 40
hp, 8 pos trt
LATHES, CNC, HORIZ. TWIN SPINDLES
16509 2001/2007 Doosan T-210 Twin Spindle Fanuc 18T/crt, Fanuc 18T/CRT, Twin Spindles, Max Machining Diameter 8.27″, Max. Machining length 7.88″, Spindle Nose A2-6, MT #7, 4000 RPM, 15 HP, (2) 8.5″ 3-Jaw Hyd. Chuck, C.C., RS-232, ID# 16509
LATHES, CNC, 2-AXIS, UNIVERSAL
16623 1997 Daewoo PUMA 10HC Mitsubishi 520L/crt, Mitsubishi 520L/crt, Swing-19.7″, Max Mach Diameter-14.6″, 3500 RPM, 30 HP, A2-8, 10″
3-Jaw Chuck, #4MT, X-8.3″, Z-21.7″, 10 tools, 3.4″ bore,ID# 16623
16414 1998/2007 Hyundai HIT-18S Siemens 840C/14″ Color crt, Hitrol-EZ/14″ Color Control,X-7.09″, Y - 20.08″, Max Swing - 17.32″, Max
Cutting - 10.00″ x 19.69″, Max Speed - 3600 RPM, Motor - 15HP, Spindle Bore - 3.15″, Tailstock.
16367 1998 Hardinge Cobra 65 Fanuc 21T/crt, Fanuc 21T/Crt, 26″ Swg, 31″ Ctrs, 29.5 HP, 12 Tools, 4500 RPM, 10″ 3-J Ck, A2-8, 2 1/2″ Bar
16241 1984 Hitachi-Seiki Hitech-Turn 20 Fanuc 3T/CRT, Fanuc 3T/crt, 17.7″ swg, 12″ centers, 8″ chk, 1.75″ bar cap, 3600 rpm, 12 pos trt
16181 1988 Femco WNCL-20/60 Fanuc 10T/CRT, Fanuc 10T/CRT, 21.3″ Swg, 10.2″ Max. Mch. Dia, 28.5″ Ctr, 2500 RPM, 30 HP, 12 Tools,
2.4″ Bore, 10″ Ck, CC, X-6″, Z-25″
LATHES, CNC, 2-AXIS UNIVERSAL W/MILLING
16492 1998 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, Swing-20.91″, X-7.09″,
Y-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16492
16463 1998/2007 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, C.C.,
Swing-20.91″, X-7.09″, Z-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16463
LATHES, ENGINE
16878 1984 Summit 19-4 x 80 , Swing Over Bed-20.5″, Swing Thru Gap-28″, Gap Length-15.375″, Swing Over Cross Slide-12.25″, Distance
Between Centers-80″,
15846 1984 Kingston HL-2500 Model D , 21″ Swg, 100″ Ctrs, 3 1/8″ Hole, 1500 RPM, 13 1/8″ SOCS, 10 HP, 28 1/8″ Gap, Inch/Metric, 3-J, 4-J,
Face,
MACHINING CENTERS, HORIZONTAL CNC
16489 1998 Mazak FH-480 Mazatrol M-Plus/crt, Mazatrol M-Plus/CRT, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30
ATC, 1260 IPM, 30 HP, CC, ID# 16489
16450 1998/2007 Mazak FH-480 Mazatrol M-Plus/crt, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30 ATC, 1260 IPM,
30 HP, CC
15510 1986 Kitamura H-300 Fanuc 11MF/CRT, Fanuc 11MF, 12″ (2) Plts, 360,000, 15.7″ x 16.7″ x 15.7″ Trvls, 30 ATC, 10,000 RPM, Color
Graphics, Conversational, RS-232,
MACHINING CENTERS, VERTICAL, CNC

16803 1999 Fadal 5020A Fadal 88HS/CRT, Fadal 88HS/CRT, Table-57″ x 20″, X-50″, Y-20″, Z-20″, #40 Taper, 7500 RPM, 22.5 HP, 30 ATC,
SMW-NC-BT-275 Rotary Table, ID# 16803
16768 1990 Kitamura Mycenter 2 Fanuc OMC Control, Fanuc OMC Control, Table-16.1″x 35.4″, Max Load-660 lbs, X-23″, Y-16.9″, Z-18.1″,
Spindle Taper- NST#40, 7000 RPM, 7.5 HP
MILLERS, CONTOUR
15173 2001 Fitchburg Curvature Milling Machine Model M0974 , PLC, 14″, 18 1/8″ Tbl, 5 HP, 41″ Max. Stroke, Coolant, Lube, Enerpac Hyd.
Clamp System,Mill is tooled and fixtured to do small and large P-line internal radial roots (Air Foil Blades)
MILLERS, UNIVERSAL
16358 1999 Sharp VH3 , Vertical & Horizontal Heads, 12″ x 51″ tbl, 37.3″ long tvl, 14.8″ cross tvl, 18.5″ vert tvl, power draw bar