Wanted: Used CNC Lathes, 40″ swing, 60″ centers, 1998 or newer.

Wanted: Used CNC Lathes w/9″ bore or larger and minimum of 60″ centers, would like 80″ centers & 10″ bore on a Used CNC Lathe. Mazak Powermaster Universal, Mori-Seiki LL-7

Contact Jon Lester - UTI Machinery Corp (877) 597-8300 or email: sales@utimachinery.com

Wanted: Used Mori-Seiki Lathes LL-7B, Fanuc 6T or newer control, Mori-Seiki LL-7B or LL7B.

Contact: Jon Lester (877) 597-8300 or email: sales@utimachinery.com

BORING MILLS, VERTICAL & VTL, CNC MULTI-SPINDLE
16506 1992/2007 Okuma & Howa ACT-2SP-V3 Fanuc 0TT/crt, Fanuc OTT/Crt, Twin Spindle, (2) 10″ Chucks, (2) 12 Station Turret, (2) Rear
Discharge C.C., (2) 30-HP Spindle Motor, Distance Between Center 23.62″, Max. Cutting Dia. 13.78″, ID# 16506
BORING MILLS, VERTICAL & VTL, CNC & NC
16510 2001 Hitachi-Seiki CS25 Seicos 21L CNC/crt, Seicos 21L/CRT, ,X-15.5″, Z-14.6″, Max Swing-15.7″, Table Dia- 10″, Max. Swing -15.7″,
Spindle Nose- A2-8, 4000 RPM, 25HP, Pick/Place Spindle System, C.C., RS-232, ID# 16510
LATHES, CNC, 2-AXIS, CHUCKER
16491 1998 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, CC, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length, 5000
RPM, 2.44 Hole, 8 Tools, Tool-Eye, ID# 16491
16462 1998/2007 Mazak QT-25C Mazatrol T-PLUS/CRT, Mazatrol T-PLUS/CRT, 8″ Ck, 17.32″ Swg, 9.45″ Mch. Dia, 19.68″ Max Mch Length,
5000 RPM, 2.44 Hole, 8 Tools
11078 1989 Jones & Lamson 615 Shaft Delta Dynapath 10/CRT, Delta 10/crt, 25″ swg, 15.5″ swg over cross slide, 6.75″ hole, 1200 rpm, 40
hp, 8 pos trt
LATHES, CNC, HORIZ. TWIN SPINDLES
16509 2001/2007 Doosan T-210 Twin Spindle Fanuc 18T/crt, Fanuc 18T/CRT, Twin Spindles, Max Machining Diameter 8.27″, Max. Machining length 7.88″, Spindle Nose A2-6, MT #7, 4000 RPM, 15 HP, (2) 8.5″ 3-Jaw Hyd. Chuck, C.C., RS-232, ID# 16509
LATHES, CNC, 2-AXIS, UNIVERSAL
16623 1997 Daewoo PUMA 10HC Mitsubishi 520L/crt, Mitsubishi 520L/crt, Swing-19.7″, Max Mach Diameter-14.6″, 3500 RPM, 30 HP, A2-8, 10″
3-Jaw Chuck, #4MT, X-8.3″, Z-21.7″, 10 tools, 3.4″ bore,ID# 16623
16414 1998/2007 Hyundai HIT-18S Siemens 840C/14″ Color crt, Hitrol-EZ/14″ Color Control,X-7.09″, Y - 20.08″, Max Swing - 17.32″, Max
Cutting - 10.00″ x 19.69″, Max Speed - 3600 RPM, Motor - 15HP, Spindle Bore - 3.15″, Tailstock.
16367 1998 Hardinge Cobra 65 Fanuc 21T/crt, Fanuc 21T/Crt, 26″ Swg, 31″ Ctrs, 29.5 HP, 12 Tools, 4500 RPM, 10″ 3-J Ck, A2-8, 2 1/2″ Bar
16241 1984 Hitachi-Seiki Hitech-Turn 20 Fanuc 3T/CRT, Fanuc 3T/crt, 17.7″ swg, 12″ centers, 8″ chk, 1.75″ bar cap, 3600 rpm, 12 pos trt
16181 1988 Femco WNCL-20/60 Fanuc 10T/CRT, Fanuc 10T/CRT, 21.3″ Swg, 10.2″ Max. Mch. Dia, 28.5″ Ctr, 2500 RPM, 30 HP, 12 Tools,
2.4″ Bore, 10″ Ck, CC, X-6″, Z-25″
LATHES, CNC, 2-AXIS UNIVERSAL W/MILLING
16492 1998 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, Swing-20.91″, X-7.09″,
Y-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16492
16463 1998/2007 Mazak SQT-18M Mazatrol T-PLUS/CRT, Mazatrol T-Plus/CRT, 10″ 3-Jaw Chuck, 2 Live Tool Holders, Tlk Stk, C.C.,
Swing-20.91″, X-7.09″, Z-20.08″, #5MT, 4000 RPM, 25 HP, ID # 16463
LATHES, ENGINE
16878 1984 Summit 19-4 x 80 , Swing Over Bed-20.5″, Swing Thru Gap-28″, Gap Length-15.375″, Swing Over Cross Slide-12.25″, Distance
Between Centers-80″,
15846 1984 Kingston HL-2500 Model D , 21″ Swg, 100″ Ctrs, 3 1/8″ Hole, 1500 RPM, 13 1/8″ SOCS, 10 HP, 28 1/8″ Gap, Inch/Metric, 3-J, 4-J,
Face,
MACHINING CENTERS, HORIZONTAL CNC
16489 1998 Mazak FH-480 Mazatrol M-Plus/crt, Mazatrol M-Plus/CRT, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30
ATC, 1260 IPM, 30 HP, CC, ID# 16489
16450 1998/2007 Mazak FH-480 Mazatrol M-Plus/crt, (2) 15.74″ Sq. Plts, 1 Degree, 22″ x 22″ x22″ Trvls, 12,000 RPM, #40, 30 ATC, 1260 IPM,
30 HP, CC
15510 1986 Kitamura H-300 Fanuc 11MF/CRT, Fanuc 11MF, 12″ (2) Plts, 360,000, 15.7″ x 16.7″ x 15.7″ Trvls, 30 ATC, 10,000 RPM, Color
Graphics, Conversational, RS-232,
MACHINING CENTERS, VERTICAL, CNC

16803 1999 Fadal 5020A Fadal 88HS/CRT, Fadal 88HS/CRT, Table-57″ x 20″, X-50″, Y-20″, Z-20″, #40 Taper, 7500 RPM, 22.5 HP, 30 ATC,
SMW-NC-BT-275 Rotary Table, ID# 16803
16768 1990 Kitamura Mycenter 2 Fanuc OMC Control, Fanuc OMC Control, Table-16.1″x 35.4″, Max Load-660 lbs, X-23″, Y-16.9″, Z-18.1″,
Spindle Taper- NST#40, 7000 RPM, 7.5 HP
MILLERS, CONTOUR
15173 2001 Fitchburg Curvature Milling Machine Model M0974 , PLC, 14″, 18 1/8″ Tbl, 5 HP, 41″ Max. Stroke, Coolant, Lube, Enerpac Hyd.
Clamp System,Mill is tooled and fixtured to do small and large P-line internal radial roots (Air Foil Blades)
MILLERS, UNIVERSAL
16358 1999 Sharp VH3 , Vertical & Horizontal Heads, 12″ x 51″ tbl, 37.3″ long tvl, 14.8″ cross tvl, 18.5″ vert tvl, power draw bar