|
| Capacity: | Swing (Left headstock / Right headstock) | 29.5 " |
| Swing Over Cross Slide (LH / RH) | 23.6 " |
| Maximum Machining Diameter (LH / RH) | 21.65 " |
| Maximum Distance Between Spindles | 52.9 " |
| Spindle: | Spindle Speed: Minimum (RPM) (LH / RH) | 0 rpm |
| Maximum (LH / RH) | 5000 rpm |
| Spindle Bore (LH / RH) | 2.99 " |
| Spindle Nose (LH / RH) | A2-6 |
| Main Motor (HP) (LH / RH) | 25 hp hp |
| Chuck: | Diameter (LH / RH) | 8 " |
| Hole Thru (LH / RH) | 2.68 " |
| Number of Jaws (LH / RH) | 3 |
| Milling Spindle: | Maximum Speed | 10,000 rpm |
| Motor | 20 hp |
| Tool index (2,3 or 4 insert multi-tools) | 30? |
| B-Axis Tilt | 15? |
| B-Axis Travel | 240? (+/- 120?) |
| C-Axis(both Spdls): | Indexing | 0.001? |
| Y-Axis: | Travel | 6.3" (+/- 3.15") |
| Traverse rate | 630 ipm |
| ATC: | Storage | 40 atc |
| Tool Change Time tool to tool | 1.5 sec |
| Lower Turret: | Position | 12 |
| Live Tooling Speed | 4000 rpm |
| Motor | 7.5 hp |
| Travels: | X1 / X2 | 21.85" / 7.48" |
| Z1 / Z2 | 43.1" / 40.9" |