Capacity: |
Swing |
32.5 " |
|
Swing Over Cross Slide/carriage |
20 " |
|
Distance Between Centers |
70 " |
Spindle: |
Spindle Speed: Minimum (RPM) |
14 rpm |
|
Maximum |
450 rpm |
|
Spindle Bore |
9.25 " |
|
Main Motor (HP) |
30 hp |
Tailstock: |
Quill Diameter |
5.5 " |
|
Taper |
6MT |
Equipped With: |
43" Swing in Gap |
|
|
16 Spindle Speeds 14-450 rpm |
|
|
16 Metric Threads, 2-16mm |
|
|
24 Feeds, 0.004 - 0.049 IPR |
|
|
23" Bed Width |
|
|
Power Feed to Tailstock (Rapids as well as selectable drilling/boring feeds) |
|
|
Hardened and Ground Bedways |
|
|
31.5" Diameter 4-Jaw Chuck |
|
|
Coolant Tank and Pump |
|
|
Electric Brake (Adjustable) |
|
|
Steady Rest 3-Roller |
|
|
Micrometer Type Carriage Stop |
|
|
Rapid on Carriage via Electric motor built into the Apron |
|
|
Variable Gear Ratios on the Cross-Slide Handwheel, Selectable by gearshift. |
|
Note: |
Machine was reconditioned in 2013. |
|
Capacity: |
Swing |
32.5 " |
|
Swing Over Cross Slide/carriage |
20 " |
|
Distance Between Centers |
70 " |
Spindle: |
Spindle Speed: Minimum (RPM) |
14 rpm |
|
Maximum |
450 rpm |
|
Spindle Bore |
9.25 " |
|
Main Motor (HP) |
30 hp |
Tailstock: |
Quill Diameter |
5.5 " |
|
Taper |
6MT |
Equipped With: |
43" Swing in Gap |
|
|
16 Spindle Speeds 14-450 rpm |
|
|
16 Metric Threads, 2-16mm |
|
|
24 Feeds, 0.004 - 0.049 IPR |
|
|
23" Bed Width |
|
|
Power Feed to Tailstock (Rapids as well as selectable drilling/boring feeds) |
|
|
Hardened and Ground Bedways |
|
|
31.5" Diameter 4-Jaw Chuck |
|
|
Coolant Tank and Pump |
|
|
Electric Brake (Adjustable) |
|
|
Steady Rest 3-Roller |
|
|
Micrometer Type Carriage Stop |
|
|
Rapid on Carriage via Electric motor built into the Apron |
|
|
Variable Gear Ratios on the Cross-Slide Handwheel, Selectable by gearshift. |
|
Note: |
Machine was reconditioned in 2013. |
|
Capacity: |
Swing |
32.5 " |
|
Swing Over Cross Slide/carriage |
20 " |
|
Distance Between Centers |
70 " |
Spindle: |
Spindle Speed: Minimum (RPM) |
14 rpm |
|
Maximum |
450 rpm |
|
Spindle Bore |
9.25 " |
|
Main Motor (HP) |
30 hp |
Tailstock: |
Quill Diameter |
5.5 " |
|
Taper |
6MT |
Equipped With: |
43" Swing in Gap |
|
|
16 Spindle Speeds 14-450 rpm |
|
|
16 Metric Threads, 2-16mm |
|
|
24 Feeds, 0.004 - 0.049 IPR |
|
|
23" Bed Width |
|
|
Power Feed to Tailstock (Rapids as well as selectable drilling/boring feeds) |
|
|
Hardened and Ground Bedways |
|
|
31.5" Diameter 4-Jaw Chuck |
|
|
Coolant Tank and Pump |
|
|
Electric Brake (Adjustable) |
|
|
Steady Rest 3-Roller |
|
|
Micrometer Type Carriage Stop |
|
|
Rapid on Carriage via Electric motor built into the Apron |
|
|
Variable Gear Ratios on the Cross-Slide Handwheel, Selectable by gearshift. |
|
Note: |
Machine was reconditioned in 2013. |
|