CNC Lathes

2008  Viper VT-33BL

26.8" swing, 41" centers, 5.15" bore, 2400 rpm, 35 Horsepower, A2-11 spindle nose, 12 pos turret, 15" chuck - ID=30641

1992  Dainichi MG-65 x 385

1992-Dainichi-MG-65 x 385-1

25.6" swing, 157" centers, 3.35" bore, 50 Horsepower, 1800 rpm, H4+V8 turrets - ID=30694

1992  Dainichi MX-75

1992-Dainichi-MX-75-1

29.5" swing, 157" centers, 5.71" bore, 50 Horsepower, 1400 rpm, H4 + V8 Turrets - ID=30695

1998  Dainichi MX-75

1998-Dainichi-MX-75-1

29.5" swing, 157" centers, 5.71" bore, 50 Horsepower, 1400 rpm, H4 + V8 Turrets - ID=30697

2007  Doosan S700

2007-Doosan-S700-1

35.8" swing, 72.83" centers, 5.98" Bore, 1500 rpm, 50 horsepower, A2-11 spdl nose, 12 pos turret, Tailstock, Tool Presetter, 18" chk, chip conv - ID=30733

2012  Hwacheon Hi-Tech 700

2012-Hwacheon-Hi-Tech 700-1

35.4" Swing, 78" centers, 5.2" bore, A2-11 nose, 1800 rpm, 40 Horsepower, 12 pos turret, 18" chuck, tool presetter, chip conv, high pressure coolant - ID=30637

1990  Mazak M5/2000 Big Bore

1990-Mazak-M5/2000 Big Bore-1

24" swing, 82" centers, 6.5" bore, 1000 rpm, 30 hp, 8 + 6 turret pos, tailstock, front air chuck, rear chuck - ID=30744

2007  Mori-Seiki SL-603B/1000

2007-Mori-Seiki-SL-603B/1000-1

39.1" swing, 28.9" swg/cross slide, 39" centers, 7.3" bore, 1500 rpm, 50 Horsepower, 12 pos trt, tailstock, 24" 3-Jaw chuck, chip conveyor - ID=30714

2014  Mazak Slant Turn Nexus 550

2014-Mazak-Slant Turn Nexus 550-1

40.9" swing, 120" centers, 12.5" spindle bore, 750 rpm, 60 hp, 12 pos trt, Front & Rear chucks, SMW Air chk on front, Manual chk on rear, NC Steady Rest Prep, High power coolant, - ID=30748

2013  Kingston CL-38A-2000

2013-Kingston-CL-38A-2000-1

26" swing, 80" centers, 4.7" bore, 1600 rpm, 30 Horsepower, A2-11 spindle nose, V8 + H6 Turrets, 15" Hydraulic chuck, tailstock - ID=30616

1998  Kingston CL-38B-3000

1998-Kingston-CL-38B-3000-1

Fanuc 0TC, 26" swing, 120" centers, 7" bore, 1000 rpm, 30 Horsepower, A2-11 spindle nose, V8 + H6 Turrets, tailstock, front and rear chucks - ID=30617

1998  Hitachi-Seiki Hitec-Turn 50G

1998-Hitachi-Seiki-Hitec-Turn 50G-1

39.4" swing, 24.4" cut dia, 44" centers, 1100 rp, 6.38" spindle bore, 50 Horsepower, 10 pos turret, tailstock, 18" chuck, Tool Setter, chip conv - ID=30655

1994  Mazak M-5/1500 Big Bore

1994-Mazak-M-5/1500 Big Bore-1

24" swing, 60" centers, 6.5" bore, 1000 rpm, 30 Horsepower, A2-11, 8 + 6 Turret pos, 21" Air Chuck - ID=30657

1997  Hyundai HiT-18S

1997-Hyundai-HiT-18S-1

17.3" swg, 19.7" centers, 3.15" bore, 3600 rpm, 20 Horsepower, 8 pos turret, tailstock, 10" chuck, Aito Tool eye, Prog Tailstock - ID=30688

1999  Hwacheon Hi-Eco 10E

1999-Hwacheon-Hi-Eco 10E-1

15.7" swing, 8.7" dia, 2.4" bore, A2-6, 5000 rpm, 10 pos trt - ID=30719

2001  Hwacheon Hi-Eco 31AA

2001-Hwacheon-Hi-Eco 31AA-1

20.5" swg, 10" dia, 26" centers, 3.4" bore, 3200 rpm, 25/30 Horsepower, 10 pos trt, 10" chk, Tailstock - ID=30718

1980  Mazak Powermaster Chucker

1980-Mazak-Powermaster Chucker-1

44" swing in Gap, 35" swing over ways, 1200 rpm, A1-11 nose, 60 hp, 6 pos turret, 32" chuck, chip conveyor - ID=30726

2006  Milltronics ML-35

2006-Milltronics-ML-35-1

36.2" swing, 45" swing/gap, 160" centers, 10" bore, A2-15 spindle nose, 750 rpm, 35 Horsepower, 8 pos turret - ID=30625

  Okuma ES-L8

-Okuma-ES-L8-1

21.65" swing, 19.68" Centers, 2.44" bore, 4200 rpm, 15 Horsepower, 12 pos trt, 8" chuck - ID=30489

2014  Okuma Genos L400E

2014-Okuma-Genos L400E-1

20.47" swg, 43.3" centers, 3.15" bore, 3000 rpm, 20 Horsepower, 12 pos trt, 10" chk - ID=30534

1996  Methods Slant 50

1996-Methods-Slant 50-1

20.47" swing, 20.87" centers, 3.15" bore, 3500 rpm, 20 hp, 10 pos turret, 10" chuck, Chip Conveyor, Tailstock - ID=30727

1996  Mori-Seiki SL-35

1996-Mori-Seiki-SL-35-1

23.6" swing, 16.5" cut dia, 4.1" bore, 30 hp, 2500 rpm, 10 pos turret, tailstock, 12" chuck, Steady rest, Mist collector - ID=30725

1994  Mazak Quick-Turn 28N

1994-Mazak-Quick-Turn 28N-1

20" swing, 39.7" centers, 4.09 Bore, 2500 rpm, 30hp, 16 pos turret, 12" chuck, Prog Tailstock, Color graphics, chip conv, tool eye - ID=30757

2012  Samsung SL-35A-1500

2012-Samsung-SL-35A-1500-1

23.6" Swg, 16.7 socs, 60" centers, 5.2" bore, 2000 rpm, 30 Horsepower, A2-11, 10 position Turret, 15" chuck, Chip Conv, tool presetter, tailstock - ID=30610

2006  Romi Centur 30G

2006-Romi-Centur 30G-1

Fanuc 0i-T CNC, GANG STYLE Lathe, 1.625" bar cap, 4,72" machining length, 5500 rpm, 10 Horsepower, 16C collet, ABR-80 Bar loader, Parts Catcher, Chip conv - ID=30643

2001  Daewoo Lynx 200LC

2001-Daewoo-Lynx 200LC-1

20" swing, 20" centers, 4500 rpm, 2.99" bore, 15 Horsepower, 12 pos trt, 8" chuck, tailstock, tool presetter, chip conveyor, parts catcher - ID=30627

1998  Daewoo Lynx 200

1998-Daewoo-Lynx 200-1

18" swing, 6" chuck, 2.44" bore, 5000 rpm, 10 Horsepower, 12 pos turret - ID=30702

1996  Haas HL-2

1996-Haas-HL-2-1

20" swing, 20" centers, 3" bore, 3750 rpm, 15 Horsepower, 10 pos trt, Tailstock, 3-Jaw Hydraulic chuck - ID=30606

2013  Haas ST-30

2013-Haas-ST-30-1

- ID=30765

2013  Haas ST-40

2013-Haas-ST-40-1

40" swing, 44" centers, 2400 rpm, 4.62" bore, 55 hp, Tool Presetter, HiL, Chip Conv, Tailstock, RJH, Extra-Perf, Gearbox, 15" chuck, Macros, RT, 16 MB - ID=30707

2010  YCM GT-250B

2010-YCM-GT-250B-1

21.6" swing, 23" centers, 3.46" bore, 3500 rpm, 20 Horsepower, 10 pos trt, Tailstock, Chip Conv, 10" chuck - ID=30716

2010  YCM TC-26

2010-YCM-TC-26-1

19.7" swg, 4000 rpm, 3.46" bore, 20 Horsepower, 12 pos trt, 10" chk, tailstock - ID=30717

2013  Haas TL-3

2013-Haas-TL-3-1

20" Swing, 60" centers, 1800 rpm, 3.5" bore, 18 hp, 12" chk, Quick-Change Tool Post - ID=30761

2006  Hurco TM-6

2006-Hurco-TM-6-1

16" swing, 16" centers, 2.44" bore, 6000 rpm, 15 hp, 12 pos turret, Tailstock, Chip Conveyor, Tool Setter, 6" chuck - ID=30767

CNC Lathes, 3-Axis or More

2014  Mazak Dual-Turn 20 GL100 Gantry

---1

(2) 8" Chucks, 12.6" turn diameter, GL100 Loader - ID=30477

2004  Mazak Multiplex 6200Y

2004-Mazak-Multiplex 6200Y-1

GL-100 Gantry Loader, 12 pos turrets, 5000 rpm, 30 Horsepower, 8" chucks, 2.4" bore, 12.5" swing, live tooling, Y-Axis, Chip Conveyor - ID=30671

2010  Okuma Genos L300-MW

2010-Okuma-Genos L300-MW-1

20" swing, 3.15" bore, 20 Horsepower, 3000 rpm, 12 pos trt, live tooling, sub-spindle - ID=30598

1986  Okuma LC-40M 1SC

1986-Okuma-LC-40M 1SC-1

OSP-5000/crt, 23.6" swg, 16.9" cut dia, 2500 rpm, 3.54" bore, 50 Horsepower, 12 pos trt - ID=30419

2006  Okuma 2SP-150H

2006-Okuma-2SP-150H-1

- ID=30677

2006  Okuma 2SP-150H

2006-Okuma-2SP-150H-1

13.78" swing, 6000 rpm, 1.65" bore, 15 Horsepower, (2) 8" chucks, (2) 12 pos turrets, OGL Gantry Loader, Chip Conv - ID=30676

2007  Okuma 2SP-150H

2007-Okuma-2SP-150H-1

13.78" swing, 6000 rpm, 1.65" bore, 15 Horsepower, (2) 8" chucks, (2) 12 pos turrets, OGL Gantry Loader, Chip Conv - ID=30675

1994  Okuma LU-35

1994-Okuma-LU-35-1

29.13" swing,36" centers, 3.54" bore, 3200 rpm, 40 Horsepower, 12 pos upper trt, 10 pos lower turret - ID=30696

2005  Mazak Quick-Turn Nexus 350M

2005-Mazak-Quick-Turn Nexus 350M-1

29.5" swing, 26" centers, 4.4" bore, 3300 rpm, 40 Horsepower, 12 pos turret, Live tooling, Tailstock. Tool eye, Chip Conv, 15" chuck - ID=30701

2003  Nakamura-Tome Super NTX

2003-Nakamura-Tome-Super NTX-1

2.5" bar cap, 15.35" Turn Dia, 43.3" turn length, 4500 rpm, 8" chk, 24 atc - ID=30755

CNC Machining Centers, Horizontal

1989  Mazak H-1000

1989-Mazak-H-1000-1

(2) 39.4" Pallets, X-64.6" Y-48" Z-39.4", 4000 rpm, 40 Horsepower, CAT 50 Taper - ID=30490

2002  Matsuura H-Plus 630

2002-Matsuura-H-Plus 630-1

(2) 24.8" pallets, X-41.33" Y-36.22" Z-38.97", 4th axis w/scale, CAT-50, 12,000 RPM, 40 HORSEPOWER, 60 ATC, hi-pressure thru spdl. Coolant, Renishaw touch probe system, laser broken tool detector - ID=30660

1996  Mitsubishi M-H4B

1996-Mitsubishi-M-H4B-1

(2) 15.75" sq pllts, X=25.6" Y-22" Z-25.6", 12000 rpm, 30 hp, 40 atc, Coolant Thru spindle, Shuttle Pallets - ID=30724

New  Toyoda FA-800

New-Toyoda-FA-800-1

(2) 31.5" pallets, Full 4th, X-53.1" Y-45.2" Z-45.2", 6000 rpm, 40Horsepower, 60 atc, coolant thru spindle - ID=30581

2008  Haas EC-400

2008-Haas-EC-400-1

(2) 15.7" pallets with 360° index, X-20" Y-20" Z-20", 12000 rpm, 40/30 Horsepower, 40 atc, Coolant Thru Spindle, Wireless Probing, Pcool, RJH, IPS, Coord, SO, Macros, Rigid tap - ID=30651

2005  Haas EC-400

2005-Haas-EC-400-1

(2) 15.75" pallets, X-20" Y-20" Z-20", 8000 rpm, 30 hp, 40 Taper, 24 ATC, 1 deg, RJH, Coolant Thru Spindle, Probing, Coord, SO, Macros, Mem Lock Key switch on pendant - ID=30743

CNC Machining Centers, Vertical

2013  Mazak VCN-530C-II

X-41.31" Y-20.88" Z-20.08", 12000 rpm, 15 Horsepower, 30 atc, 4th-axis - ID=30538

2011  Hurco VMX-42SR

---1

5-Axis, X-42" Y-24" Z-24", 12000 rpm, 48 Horsepower, #40 taper, 40 atc, Tilting spindle, rotary table - ID=30732

2015  Haas VF-5/40

2015-Haas-VF-5/40-1

X-50" Y-26" Z-25", 8100 rpm, 30 Horsepower, CAT40 Taper, 24+1 sidemount ATC, 4th-axis ready, Coolant thru spdl, Aux Coolant Filter, Pcool, RJH, WIPS, auger, 16" Troyke 4-axis rotary table - ID=30623

2000  Hardinge VMC-800 II

2000-Hardinge-VMC-800 II-1

X-31.5" Y-20.08" Z-20.08", 8000 rpm, 18 Horsepower, 20 atc - ID=30589

2007  Haas VF-5B/40

2007-Haas-VF-5B/40-1

X-50" Y-26" Z-25", 10,000 rpm, 30 Horsepower, gearbox, 24+1 ATC, Coolant thru spindle, HiL, Aux Coolant Filter sys, 16MB, Auger, Pcool, Coord, IPS, 4th axis, RJH, Macros, HSM, WiPS, HRT210 Rotary - ID=30663

2013  Haas VF-6/50

2013-Haas-VF-6/50-1

X-64" Y-32" Z-30", 7500 rpm, 30 hp, 50 Taper Geared Head, 30 ATC sidemount, Thru Spindle Coolant, ACF, Wips-Renishaw, Macros, Coord, RT, SO, 16 MB, IPS, Auger, HiL, Pcool, RJH, EPFDM - ID=30704

2013  Haas VF-6/50

2013-Haas-VF-6/50-1

X-64" Y-32" Z-30", 7500 RPM, 50 Taper, 30 HP, 30 ATC, Coolant Thru Spindle, Probing, Pcool, Aux coolant filter system, HiL - ID=30762

2013  Haas VF-7/50 (3)

2013-Haas-VF-7/50 (3)-1

X-84" Y-32" Z-30", 30 hp, 7500 rpm, 50 Taper Geared Head, 30 ATC sidemount, Thru Spindle Coolant, ACF, Wips-Renishaw, Macros, Coord, RT, SO, 16 MB, IPS, Auger, HiL, Pcool, RJH, EPFDM - ID=30705

  Mighty V-560

-Mighty-V-560-1

16.9" x 27.5" Table, X-22" Y-17" Z-17.7", 40 Taper, 10 Horsepower, 20 atc - ID=30250

1990  Mori-Seiki MV-40B

1990-Mori-Seiki-MV-40B-1

X-31.5" Y-16.1" Z-20.1", 8000 rpm, 10 Horsepower, 20 atc - ID=30662

1994  Mazak V-414

1994-Mazak-V-414-1

X-22" Y-16" Z-18", 7000 rpm, 10 Horsepower, Cat40 Taper, 24 atc, - ID=30672

2004  Acer VMC-1724

2004-Acer-VMC-1724-1

X-24" Y-17.3" Z-20", 8000 rpm, 15 Horsepower, 40 taper, 20 atc - ID=30506

1998  Bridgeport Torque Cut 30

1998-Bridgeport-Torque Cut 30-1

X-30" Y-16" Z-20", 8000 rpm, 10 Horsepower, 22 atc, 4th-axis rotary table - ID=30588

1997  Supermax Max-8

1997-Supermax-Max-8-4

Fanuc 18M/crt, X-65" Y-30" Z-30", 4000 rpm, 50 Taper, 20 Horsepower, 30 atc, 12" 4th-Axis Rotary table - ID=30431

2000  Cincinnati Arrow VMC-1000

2000-Cincinnati-Arrow VMC-1000-1

X-40" Y-20" Z-22", 8000 rpm, 15 Horsepower, 40 Taper, 21 atc - ID=30632

2005  Doosan DMV-3016LD

2005-Doosan-DMV-3016LD-1

X-30" Y-16.1" Z-20.1", 8000 rpm, 15 Horsepower, 20 atc, Rigid Tapping - ID=30628

1996  Fadal VMC-15

1996-Fadal-VMC-15-1

X-20" Y-16" Z-20", 7500 rpm, #40 taper, 15 Horsepower, 21 atc - ID=30607

1995  Fadal VMC-4020HT

1995-Fadal-VMC-4020HT-1

X-40" Y-20" Z-20", 10000 rpm, 22.5 HORSEPOWER, 40 Taper, 21 atc - ID=30656

1999  Chiron FZ-08

1999-Chiron-FZ-08-1

11.8" x 17.7" pallets, X-12" Y-10" Z-10", 10,000 rpm, 5 Horsepower, 12 atc - ID=30668

1995  Fadal VMC-4020HT

1995-Fadal-VMC-4020HT-1

X-40" Y-20" Z-20", 10,000 rpm, 22.5 Horsepower, 21 atc - ID=30689

2006  YCM MV-106A

2006-YCM-MV-106A-1

X-40" Y-23.6" Z-23.6", 8,000 rpm, 20 Horsepower, Cat40 Taper, 24 atc, chip conv, remote jog handle, coolant thru spindle, RS-232 - ID=30639

2000  Haas VF-0

2000-Haas-VF-0-1

X-20" Y-16" Z-20", 7500 rpm, 20 horsepower, 20 atc, Macros, Coord, Rigid Tap, Spindle Orientation, Floppy, Pcool, Chip Conv, RJH, Quick Code, 1MB, 4th-Axis Drive and Wiring - ID=30739

2002  Haas VF-5/40

2002-Haas-VF-5/40-1

X-50" Y-26" Z-25", 10,000 rpm, 20 hp, 20 atc, RJH, Floppy drive, Prog Coolant Nozzle, 4th-Axis drive, Chip Auger, new spindle in 2017 - ID=30736

2008  Haas TM-1P

2008-Haas-TM-1P-1

X-30" Y-12" Z-16", 4000 rpm, 40 taper, 7.5 hp, 10 atc, wireless probing, 4th axis drive, 16MB, Auger, HFCPK, IPS, Rigid tap, VQC, Macros, Coord, SO - ID=30754

2013  Haas VF-11/50

2013-Haas-VF-11/50-1

X-120" Y-40" Z-30", 7500 rpm, 30 hp, 50 taper Geared Head, 30 ATC sidemount, Thru Spindle Coolant, ACF, Wips-Renishaw, Macros, Coord, RT, SO, 16 MB, IPS, Auger, HiL, Pcool, RJH, EPFDM - ID=30706

2007  Haas VF-2D

2007-Haas-VF-2D-1

X-30" Y-16" Z-20", 7500 rpm, 20 hp, 20 atc, Pcool, 4th-Axis drive, Haas Rotary Table - ID=30760

2013  Haas VF-4

2013-Haas-VF-4-1

X-50" Y-20" Z-25", 8100 rpm, 30 hp, gearbox, 24+1 sidemount ATC, Coolant Thru Spindle, Aux Coolant Filter, HIL, Pcool, RJH, Auger, Macros, Rot and Scaling, SO 16 MB, IPS, USB - ID=30763

2013  Haas VF-4

2013-Haas-VF-4-1

X-50" Y-20" Z-25", 8100 rpm, 30 hp, gearbox, 24+1 sidemount ATC, Coolant Thru Spindle, Aux Coolant Filter, HIL, Pcool, RJH, Auger, Macros, Rot and Scaling, SO 16 MB, IPS, USB - ID=30764

2007  Haas TM-3

2007-Haas-TM-3-1

X-40" Y-20" Z-16", 7.5 Horsepower, 40 taper, 4000 rpm, 20 atc, Chip pan, chip/coolant guard, Coolant Pump Kit, IPS, RT, VQC, Coord R & S, SO 16MB, 4th Axis Drive, Wireless probing, Only spindle 539 Hours - ID=30715

Grinders

1954  Waldrich Siegen WS III 850x5000

1954-Waldrich Siegen-WS III 850x5000-2

40" x 240" capacity, (2) sets of Steady Rests, Coolant Filtration, Electrics redone, Crowning, Taper, SBS Dynamic Wheel Balance System - ID=30723

  Gallmeyer & Livingston Model F

-Gallmeyer & Livingston-Model F-1

20" x 72" - ID=30653

  Farrel Dual Wheel Roll Grinder

60" max dia, 292" max face grind length - ID=30731

Horizontal Boring Mill, CNC

2012  Doosan DBC-110s

Fanuc 31iMA, 4.3" spindle, X-78.7" Y-59" Z-47" W-21.6", 3000 rpm, 55" x 63" full 4th rotary table, 40 atc - ID=30381

2008  Femco BMC-110R1

2008-Femco-BMC-110R1-1

Fanuc 21iMB/crt, 4.3" spindle, 44" x 49" table with Full CNC Contouring, X-55.1" Y-47.2", Saddle-43.3", Spindle travel-19.69", 60 ATC - ID=30319

Horizontal Boring Mills, Manual

1978  Union BFT-90/3

1978-Union-BFT-90/3-1

3.5" spindle, X-63" Y-49.2" Z36.4" W-27.9", 49.2" x 55.1" table, 360° rotary - ID=30415

1970  Wotan B130S

5" spindle, 60" x 67" rotary table, X-78" Y-63", 35" spdl tvl, 69" Long. Tvl, 1000 rpm, 50 taper - ID=30735

1966  Giddings & Lewis 70-G5T

1966-Giddings & Lewis-70-G5T-1

5" dia. spindle, 60" x 120" table, X-103" Y-72" Saddle 46", 1120 rpm, 25 Horsepower, 48" x 48" rotary tbl - ID=30417

Lathes, Manual

1996  Kingston HR-3000

1996-Kingston-HR-3000-1

32" swing, 40" swing-gap, 120" centers, 4.5" bore, 20 Horsepower, 1200 rpm, Steady, Taper, Threading - ID=30442

1980  Mazak Oil Country

1980-Mazak-Oil Country-1

30" swing, 78" centers, 12.6" bore, 300 rpm, A2-20 Nose, Front & Rear chucks, threading - ID=30620

1980/2010  Poreba TPL-90/3M

1980/2010-Poreba-TPL-90/3M-1

36" swg, 120" centers, 250 rpm, 12.5" bore, 30 Horsepower, taistock, Front/Rear chucks, taper, threading, rapid traverse, 4-Way tool post - ID=30685

1984  Poreba TR100/5M

1984-Poreba-TR100/5M-1

41" swg, 196" centers, 4.7" bore, 50 Horsepower, 4-Way Tool Post, (3) Steady rests, (1) Follow rest, Taper, coolant - ID=30533

1964/2013  Weipert (German) Hollow Spindle 9"

1964/2013-Weipert (German)-Hollow Spindle 9"-1

32.5" swing, 43" swing in gap, 9.25" Spindle Bore, 450 rpm, tailstock, 31" 4-jaw chuck - ID=30394

2000  Vantage Hollow Spindle

2000-Vantage-Hollow Spindle-1

40" swing, 120" centers, 12.5" bore, 400 rpm, Inch/Metric Threading, Front and Rear 4-jaw chucks - ID=30636

2014  Acra 36200

2014-Acra-36200-1

36" swing, 200" centers, 400 rpm, 4..12" bore, 20 Horsepower, 24" 3-Jaw Chuck, Newall Digital Readouts, threading, tailstock, Steady rest, 4-Way Tool Post - ID=30681

1982  Broadbent BL16-HSK

1982-Broadbent-BL16-HSK-1

34" swing, 120" centers, 16.375" bore, 350 rpm, 30 Horsepower, 4-way tool post, (2) 30" chucks, Taper attach - ID=30619

1978  Clausing Colchester 21 x 80

1978-Clausing-Colchester 21 x 80-1

20" swing, 80" centers, digital readouts, 3.5" bore, 12.5 Horsepower, 1400 rpm, tailstock, Taper Attach, steady rest - ID=30420

Measuring Machine

2001/09  Sheffield Discovery II D12

2001/09-Sheffield-Discovery II D12-1

20" x 36" x 16", software updated to DCC/CNC Retrofit in 2009 - ID=30684

Mills, Manual

2001  Fitchburg Curvature Mill Model M0974

2001-Fitchburg-Curvature Mill Model M0974-1

PLC, 14", 18 1/8" Tbl, 5 HORSEPOWER, 41" Max. Stroke, Coolant, Lube, Enerpac Hyd. Clamp System,Mill is tooled and fixtured to do small and large P-line internal radial roots (Air Foil Blades) - ID=15173

Press Brake

  LVD 55 BH 04 MNC

-LVD-55 BH 04 MNC-1

55 ton - ID=30654

1974  Cincinnati 1000H

1974-Cincinnati-1000H-1

1000 ton, 20' overall bending length, 168" between columns, 12" stroke, die holders, safety light curtains - ID=30638

Punches, Turret, CNC

2013  WA Whitney 3400 XP with Tool Caddy

2013-WA Whitney-3400 XP with Tool Caddy-1

Siemens 840Di CNC, 40 ton, 60" x 140" Positioning Area, 9 tools plus Tool Caddy option 30 tools, HPR260XD Plasma Cutting System - ID=30728

2012  WA Whitney 3400XP

2012-WA Whitney-3400XP-1

Siemens 840Di CNC, 40 ton, 60" x 140" Positioning Area, 9 tools plus Tool Caddy option 30 tools, HPR260XD Plasma Cutting System - ID=30766

Rotary Tables

2015  Haas HRT-450

2015-Haas-HRT-450-1

17.7" diameter, Sigma 5 Servo Motor - ID=30659

2008  Haas TR210 Trunnion

2008-Haas-TR210 Trunnion-1

8.3" platter, trunnion table - ID=30680

Saws, Band, Horizontal

2014  W.F. Wells W-9-1

2014-W.F. Wells-W-9-1-1

9" x 17" capacity - ID=30524

Saws, Cold

1995  Kaltenbach SKL-400-NA

1995-Kaltenbach-SKL-400-NA-1

5.12" Capacity Round, 4.75" Capacity Square, 2" x 12" Capacity Rectangular, 15.75" Blade Dia - ID=30369

Shears

  Amada M-2045

-Amada-M-2045-1

3/16" x 78" cap, 39" back gauge - ID=30678

Vertical Boring Mills, VTL, Manual

1970s  Morando 84

1970s-Morando-84-1

84" chuck, 76" under rail, 120 rpm, 75 Horsepower, 2 ram heads - ID=30633

  Summit 59" VBM

-Summit-59" VBM-1

59" table, 70" swing, 47" under rail, Turret Head, Ram head, Sidehead - ID=30652

1968  Bullard 36" Dynatrol

1968-Bullard-36" Dynatrol-1

36" chuck, 48" swing, 36" under rail, 468 rpm, 50 Horsepower, turret head, side head - ID=30666

1968  Bullard 36" Dynatrol

1968-Bullard-36" Dynatrol-1

36" chuck, 48" swg, 54" under rail, Ram head, Side head with Size-Au-Trol - ID=30687

  Giddings & Lewis 96

-Giddings & Lewis-96-1

96" table, 104" swing, 96" under rail, 50 Horsepower, 80 rpm, new variable speed drive, (2) Ram heads, side head, - ID=30634

Vertical Boring Mills, VTL, VBM, CNC

1996  Tos SKS-16 Live Tooling

1996-Tos-SKS-16 Live Tooling-1

63" Chuck, 78.7" swing, 76" under rail, 315 rpm, 75 Horsepower, 15 atc, 44 atc, Live Tooling, Full C-Axis, Probe - ID=30682

  Sundstrand VL-14

-Sundstrand-VL-14-1

57" chk, 67" swing, 235 rpm, 90 hp, 12 atc, retrofitted with Fagor CNC control - ID=30759

  Bullard 120"

-Bullard-120"-1

120" table, 127" swing, 96" under rail, 100 Horsepower, 84 rpm - ID=30626

1995  Bullard 36" Dynatrol

1995-Bullard-36" Dynatrol-1

Fanuc 16TT/crt, 36" 3-Jaw Chuck, 48" Swing, 36" Height Under Rail, 4-Position Turret Head, Side Head, 40 Horsepower, 500 rpm - ID=30228

2012  YouJi VTL-1000ATC

2012-YouJi-VTL-1000ATC-1

39.4" Chuck, 53.2" swing, 600 rpm, 50 Horsepower, 12 atc - ID=30458