Summit 42x120 Oil Country Lathe - 2012
LATHES, ENGINE
ID#: 31061
41.7" swg, 29.5" swg/ocs, 120" centers, 12.2" Spindle bore, A2-20 nose, 300 rpm, 30 hp, Steady rest, Follow rest, Taper Attach, Thread dial, Front & rear chucks, like new
Specifications
| Capacity: | Swing | 41.7 |
| Swing in Gap | 48.1 | |
| Length of Gap | 22.4 | |
| Swing Over Cross Slide/carriage | 29.5 | |
| Distance Between Centers | 120 | |
| Spindle: | Spindle Speed: Minimum (RPM) | 4 rpm |
| Maximum | 300 rpm | |
| Spindle Bore | 12.2 | |
| Spindle Nose | A2-20 | |
| Main Motor (HP) | 30 hp | |
| Attachments: | Threading | yes, auto |
| Taper Attachment | yes | |
| Equipped With: | (1) 25" 3-Jaw Bison Steel Chuck with 12.5" hole | |
| (1) 25" 4-Jaw Chuck | ||
| Steady Rest | ||
| Follow Rest | ||
| Full Length Splash Guard | ||
| Chuck Guard | ||
| Halogen Work Light | ||
| Coolant System | ||
| Thread Dial | ||
| 21.3" Cross Travel | ||
| Tailstock | ||
| Newall Digital Readouts | ||
| Note: | Machine was purchased new in late 2012 for a job that didn't work out. Machine | |
| has very little use since. Estimated to have only couple hundred hours of actual | ||
| cutting time. |