Hankook Protec 9NC/4000 Big Bore - 2006
LATHES, CNC, UNIVERSAL
ID#: 31112
Control: Fanuc 21iTB/crt
37.4" swing, 157" centers, 10" Spdl Bore, 630 rpm, 35 hp, (2) 25" chucks, 8 pos trt, tool post, tailstock, stead rests, follow rest
Specifications
| Capacity: | Swing | 37.43 " |
| Swing Over Cross Slide | 24.8 " | |
| Distance Between Centers | 157.6 " | |
| Spindle: | Spindle Speed: Minimum (RPM) | 3 rpm |
| Maximum | 630 rpm | |
| Spindle Bore | 10 " | |
| Main Motor | 35 hp | |
| Spindle Nose | A2-15 | |
| Turret: | Number Of Positions | 8 |
| X-Axis Travel | 21.1 " | |
| Z-Axis Travel | 151 " | |
| Tailstock: | Quill Diameter | 9.85 " |
| Taper | 6 MT | |
| Equipped With: | Fanuc 21i-TB Control | |
| 10" Spindle Bore/Bar Capacity | ||
| Chip Conveyor | ||
| 25" 4 Jaw Manual Chuck with 10" hole on Front | ||
| 25" 3 Jaw Manual Chuck with 10" hole on Rear | ||
| 8 Station Turret that Mounts on Cross Slide | ||
| Dorian Tool Post Mounted on Cross Slide | ||
| Heavy Duty Tailstock | ||
| (2) Roller Type Steady Rests | ||
| (1) Follower Rest | ||
| Long Boring Bar Attachment | ||
| Remote Jog Handle | ||
| Enclosed with Slide Doors | ||
| Work Light | ||
| Coolant System with Tank & Pump | ||
| Hard Disk Interface | ||
| RS 232 Port Interface | ||
| All Available Manuals & Tooling | ||
| Note: | Machine has 6,069 Run Time Hours |